DESCRIPTION
THOUZER GIANT 4-MOTOR is a Collaborative-Robot from Doog. It is built for Intralogistics, Material-Handling, Transport. Key figures: 300 kg payload.
THOUZER GIANT 4-MOTOR is a collaborative robotic cart from Doog for carrying and towing loads in workplaces that were never designed for automation. The GIANT 4-MOTOR is a pre-shipment option for the THOUZER GIANT E-SERIES that replaces the front wheels with larger omni-wheels about 1.5 times the diameter and adds drive motors to them, going from two to four motors for more traction and braking under heavy loads. It comes as RMS-15E2A (top speed 8.0 km/h, about twice the standard driving force, towing up to 1,000 kg) and RMS-15E2B (torque-first gearing, top speed 3.6 km/h, about four times the standard driving force, towing up to 2,000 kg), both rated IPX2 for outdoor transport between buildings. It measures 700 x 1,180 mm with a 700 x 1,000 mm platform at 455 mm height, carries up to 300 kg on the platform, tows up to 1,000 kg (version A) or 2,000 kg (version B) and reaches up to 8.0 km/h in Follow-Me mode, with a range of 10 km (A) or 7 km (B) per charge without towing. It offers three navigation modes that can be switched as the job changes: Follow-Me, which uses wide-angle LiDAR tracking to follow a person, forklift, truck or other target at the press of one button with no tag, map or setup; Memory Trace, which replays a route after an operator walks it once, using frame map matching instead of global SLAM mapping; and Line Trace, which follows low-cost floor tape with barcode markers for destinations and instructions. It runs indoors and outdoors on uneven floors, asphalt, gravel, brick and wet or oily floors, handles a 6-degree slope and a 3 cm step, and works day and night and in light rain. LiDAR obstacle detection, an emergency stop and a safety bumper are standard; it is CE marked, built to ISO 3691-4 and made in Japan. It ships as BASIC (Follow-Me and Memory Trace, ready out of the box) or E-SERIES (advanced Memory Trace, Line Trace, peripheral I/O and system integration), with a paid upgrade between them.
FEATURES
- Platform payload up to 300 kg
- Towing up to 1,000 kg (version A) or 2,000 kg (version B)
- Up to 8.0 km/h in Follow-Me
- 3.6 km/h in Memory/Line Trace
- Range 10 km (A) or 7 km (B) per charge (no towing)
- Robot 700 x 1,180 mm
- platform 700 x 1,000 mm at 455 mm height
- Four drive motors with large front omni-wheels
- Two versions: RMS-15E2A (8.0 km/h, 1,000 kg towing) and RMS-15E2B (3.6 km/h, 2,000 kg towing)
- IPX2 water protection for outdoor use
- Follow-Me: LiDAR target following, one button, no tag or map
- Memory Trace: walk a route once, robot replays it
- Line Trace with floor tape and barcode markers (E-SERIES)
- Carries and tows at the same time
- Indoor and outdoor: asphalt, gravel, brick, wet or oily floors
- 6-degree slope, 3 cm step, day and night, light rain
- LiDAR obstacle detection, emergency stop, safety bumper
- CE marked, built to ISO 3691-4, made in Japan
- BASIC or E-SERIES configuration
- accessories for platforms, towing, batteries, safety and interfaces
TECHNICAL SPECIFICATIONS
Verified| Physical | |
| Dimensions | L 1.18 m × W 700 mm |
|---|---|
| Payload | 300 kg |
| Mobility | |
| Movement Type | Wheeled |
| Speed | 7.99 km/h |
| Environment | Factories, warehouses, construction sites, retail and outdoor inter-building routes, on uneven, wet or sloped ground, IPX2 |
| Sensing & Compute | |
| Sensors | LiDAR (Follow-Me tracking, obstacle detection, Memory Trace), Safety bumper, Emergency stop, Optional Line Trace sensor |
ROBOT FORUMS
Loading forums...
TECHNICAL SPECIFICATIONS
Verified| Physical | |
| Dimensions | L 1.18 m × W 700 mm |
|---|---|
| Payload | 300 kg |
| Mobility | |
| Movement Type | Wheeled |
| Speed | 7.99 km/h |
| Environment | Factories, warehouses, construction sites, retail and outdoor inter-building routes, on uneven, wet or sloped ground, IPX2 |
| Sensing & Compute | |
| Sensors | LiDAR (Follow-Me tracking, obstacle detection, Memory Trace), Safety bumper, Emergency stop, Optional Line Trace sensor |
Images
martti
Image Contributions
Videos
ROBOT FORUMS
Loading forums...
RATINGS
FREQUENTLY ASKED QUESTIONS
What is the THOUZER GIANT 4-MOTOR?
THOUZER GIANT 4-MOTOR is a collaborative robotic cart from Doog for carrying and towing loads in workplaces that were never designed for automation.
Who makes the THOUZER GIANT 4-MOTOR?
The THOUZER GIANT 4-MOTOR is made by Doog, a robotics company based in Japan.
How much does the THOUZER GIANT 4-MOTOR cost?
Doog has not publicly announced pricing for the THOUZER GIANT 4-MOTOR. You can enquire through RobotAIGeek for current pricing.
What is the THOUZER GIANT 4-MOTOR used for?
The THOUZER GIANT 4-MOTOR is designed for intralogistics, material-handling, and transport. It is used in construction, warehouse & logistics, manufacturing, and retail settings.
What is the payload capacity of the THOUZER GIANT 4-MOTOR?
The THOUZER GIANT 4-MOTOR has a payload capacity of 300 kg.
How fast is the THOUZER GIANT 4-MOTOR?
The THOUZER GIANT 4-MOTOR can move at speeds of up to 7.99 km/h.
COMPARE WITH SIMILAR ROBOTS
See how this robot stacks up against its closest alternatives
- THOUZER GIANT 4-MOTOR vs THOUZER GIANT
- THOUZER GIANT 4-MOTOR vs Follower Robot 150 kg
- THOUZER GIANT 4-MOTOR vs THOUZER MINI
- THOUZER GIANT 4-MOTOR vs THOUZER STANDARD
- THOUZER GIANT 4-MOTOR vs AMR-AI-Roller Robot
