DESCRIPTION
FreeHand v1.2 is a Medical-Robots from MediAkris. It is built for Medical-Assistance, Surgery.
FreeHand v1.2 is the robotic laparoscope holder made by FreeHand Surgical in the UK, a development of the Prosurgics FreeHand camera controller, which puts the surgeon in direct control of the scope position. The surgeon wears a hands-free controller on a headband or surgical cap, selects the direction of tilt and pan with head movements and starts the movement with an activation pedal; when the foot leaves the pedal the motion stops and the scope is held completely still. A quick tap on the pedal switches to zoom mode to move the scope in or out of the port, an indicator unit on the stack next to the monitor shows the selected direction, and three movement speeds are available. Single-use sterile motorised modules let the system be used for back-to-back procedures without separate sterilisation. FreeHand v1.2 was CE marked, FDA 510(k) cleared and registered with Japan's MHLW, and was used in urological, gynaecological and general surgery worldwide.
FEATURES
- Robotic laparoscope holder controlled by the surgeon
- Head-band or cap controller selects tilt and pan direction
- Activation pedal starts and stops movement
- tap for zoom mode
- Indicator unit shows selected direction
- Three movement speeds
- Single-use sterile motorised modules for back-to-back cases
- CE marked, FDA 510(k), Japan MHLW registered
TECHNICAL SPECIFICATIONS
| Mobility | |
| Movement Type | Stationary |
|---|---|
| Environment | Operating rooms, laparoscopic surgery |
ROBOT FORUMS
Loading forums...
TECHNICAL SPECIFICATIONS
| Mobility | |
| Movement Type | Stationary |
|---|---|
| Environment | Operating rooms, laparoscopic surgery |
Images
martti
martti
marttiImage Contributions
Videos
ROBOT FORUMS
Loading forums...
RATINGS
FREQUENTLY ASKED QUESTIONS
What is the FreeHand v1.2?
FreeHand v1.2 is the robotic laparoscope holder made by FreeHand Surgical in the UK, a development of the Prosurgics FreeHand camera controller, which puts the surgeon in direct control of the scope position.
Who makes the FreeHand v1.2?
The FreeHand v1.2 is made by MediAkris, a robotics company based in Slovenia.
How much does the FreeHand v1.2 cost?
MediAkris has not publicly announced pricing for the FreeHand v1.2. You can enquire through RobotAIGeek for current pricing.
What is the FreeHand v1.2 used for?
The FreeHand v1.2 is designed for medical-assistance and surgery. It is used in healthcare settings.
COMPARE WITH SIMILAR ROBOTS
See how this robot stacks up against its closest alternatives
- FreeHand v1.2 vs Revolve Surgical Robotic Surgical Platform
- FreeHand v1.2 vs KINEVO 900 S
- FreeHand v1.2 vs Pulsar
- FreeHand v1.2 vs Galaxi
- FreeHand v1.2 vs MISSO
