DESCRIPTION
MagCrawler is an Industrial-Robot from TSC Subsea. It is built for Inspection, Monitoring.
MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in plates. It reaches areas that are restricted, dangerous or expensive to reach with divers, such as splash zones and confined compartments. The ROV carries the crawler to the structure and releases it once it has attached magnetically to the surface. Two rubber caterpillar tracks drive and steer it, motorised mechanisms place the probe precisely over the weld, a 360-degree rotating head gives full coverage of flange welds and the heat-affected zone, and passive compliance keeps the probe aligned on the surface. Dedicated control software follows simple weld paths with closed-loop motor control for accurate weld tracking at a uniform scan speed, while on-board backlit cameras give the operator real-time visual feedback. It can also be launched from deck, inspects through paint and coatings and tolerates residual marine growth.
FEATURES
- Magnetic attachment
- ROV-deployed or deck-launched
- Two rubber caterpillar tracks for traction and steering
- Deploys ACFM array probes on welds
- Motorised probe positioning, longitudinal and transverse adjustment
- 360-degree rotating head for flange welds
- Closed-loop motor control for weld tracking
- On-board backlit cameras
- Rated to 150 m water depth
- Works on diameters above 760 mm
- Inspects through paint and coatings
TECHNICAL SPECIFICATIONS
Verified| Mobility | |
| Movement Type | Wheeled |
|---|---|
| Environment | Subsea structures and splash zones of offshore oil and gas and wind assets, water depths up to 150 m |
| Actuators | Two rubber caterpillar tracks with magnetic attachment; motorised probe deployment and 360-degree rotating head |
| Sensing & Compute | |
| Sensors | ACFM array probes; on-board backlit cameras |
| Software / AI | Dedicated control software for weld-path following with closed-loop motor control |
ROBOT FORUMS
Loading forums...
TECHNICAL SPECIFICATIONS
Verified| Mobility | |
| Movement Type | Wheeled |
|---|---|
| Environment | Subsea structures and splash zones of offshore oil and gas and wind assets, water depths up to 150 m |
| Actuators | Two rubber caterpillar tracks with magnetic attachment; motorised probe deployment and 360-degree rotating head |
| Sensing & Compute | |
| Sensors | ACFM array probes; on-board backlit cameras |
| Software / AI | Dedicated control software for weld-path following with closed-loop motor control |
Images


Image Contributions
Videos
ROBOT FORUMS
Loading forums...
RATINGS
FREQUENTLY ASKED QUESTIONS
What is the MagCrawler?
MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in pl…
Who makes the MagCrawler?
The MagCrawler is made by TSC Subsea, a robotics company based in United Kingdom.
How much does the MagCrawler cost?
TSC Subsea has not publicly announced pricing for the MagCrawler. You can enquire through RobotAIGeek for current pricing.
What is the MagCrawler used for?
The MagCrawler is designed for inspection and monitoring. It is used in energy settings.
COMPARE WITH SIMILAR ROBOTS
See how this robot stacks up against its closest alternatives
- MagCrawler vs ORCA Hull Inspection Crawler
- MagCrawler vs MAG Crawler
- MagCrawler vs A-UT Machine
- MagCrawler vs TRI Coal Conveyor Corridor Inspection Robot
- MagCrawler vs TRI Wind Turbine Nacelle Inspection Robot






