★아직 평가 없음

MagCrawler

Industrial-RobotUnited KingdomUnited Kingdom출시됨
MagCrawler
비교
산업:
가격:
미공개

설명

MagCrawler은(는) TSC Subsea의 Industrial-Robot입니다. 점검, 모니터링 용도로 설계되었습니다.

MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in plates. It reaches areas that are restricted, dangerous or expensive to reach with divers, such as splash zones and confined compartments. The ROV carries the crawler to the structure and releases it once it has attached magnetically to the surface. Two rubber caterpillar tracks drive and steer it, motorised mechanisms place the probe precisely over the weld, a 360-degree rotating head gives full coverage of flange welds and the heat-affected zone, and passive compliance keeps the probe aligned on the surface. Dedicated control software follows simple weld paths with closed-loop motor control for accurate weld tracking at a uniform scan speed, while on-board backlit cameras give the operator real-time visual feedback. It can also be launched from deck, inspects through paint and coatings and tolerates residual marine growth.

주요 기능

  • Magnetic attachment
  • ROV-deployed or deck-launched
  • Two rubber caterpillar tracks for traction and steering
  • Deploys ACFM array probes on welds
  • Motorised probe positioning, longitudinal and transverse adjustment
  • 360-degree rotating head for flange welds
  • Closed-loop motor control for weld tracking
  • On-board backlit cameras
  • Rated to 150 m water depth
  • Works on diameters above 760 mm
  • Inspects through paint and coatings

기술 사양

검증됨
이동성
이동 방식바퀴형
작동 환경Subsea structures and splash zones of offshore oil and gas and wind assets, water depths up to 150 m
액추에이터Two rubber caterpillar tracks with magnetic attachment; motorised probe deployment and 360-degree rotating head
센싱 & 컴퓨팅
센서ACFM array probes; on-board backlit cameras
소프트웨어 / AIDedicated control software for weld-path following with closed-loop motor control
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the MagCrawler?

MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in pl…

Who makes the MagCrawler?

The MagCrawler is made by TSC Subsea, a robotics company based in United Kingdom.

How much does the MagCrawler cost?

TSC Subsea has not publicly announced pricing for the MagCrawler. You can enquire through RobotAIGeek for current pricing.

What is the MagCrawler used for?

The MagCrawler is designed for 점검 and 모니터링. It is used in 에너지 settings.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

MagCrawler 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?