説明
MagCrawlerはTSC SubseaのIndustrial-Robotです。 点検、モニタリング向けに設計されています。
MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in plates. It reaches areas that are restricted, dangerous or expensive to reach with divers, such as splash zones and confined compartments. The ROV carries the crawler to the structure and releases it once it has attached magnetically to the surface. Two rubber caterpillar tracks drive and steer it, motorised mechanisms place the probe precisely over the weld, a 360-degree rotating head gives full coverage of flange welds and the heat-affected zone, and passive compliance keeps the probe aligned on the surface. Dedicated control software follows simple weld paths with closed-loop motor control for accurate weld tracking at a uniform scan speed, while on-board backlit cameras give the operator real-time visual feedback. It can also be launched from deck, inspects through paint and coatings and tolerates residual marine growth.
特長
- Magnetic attachment
- ROV-deployed or deck-launched
- Two rubber caterpillar tracks for traction and steering
- Deploys ACFM array probes on welds
- Motorised probe positioning, longitudinal and transverse adjustment
- 360-degree rotating head for flange welds
- Closed-loop motor control for weld tracking
- On-board backlit cameras
- Rated to 150 m water depth
- Works on diameters above 760 mm
- Inspects through paint and coatings
技術仕様
検証済み| 移動性能 | |
| 移動方式 | 車輪型 |
|---|---|
| 使用環境 | Subsea structures and splash zones of offshore oil and gas and wind assets, water depths up to 150 m |
| アクチュエーター | Two rubber caterpillar tracks with magnetic attachment; motorised probe deployment and 360-degree rotating head |
| センシング・演算 | |
| センサー | ACFM array probes; on-board backlit cameras |
| ソフトウェア / AI | Dedicated control software for weld-path following with closed-loop motor control |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 移動性能 | |
| 移動方式 | 車輪型 |
|---|---|
| 使用環境 | Subsea structures and splash zones of offshore oil and gas and wind assets, water depths up to 150 m |
| アクチュエーター | Two rubber caterpillar tracks with magnetic attachment; motorised probe deployment and 360-degree rotating head |
| センシング・演算 | |
| センサー | ACFM array probes; on-board backlit cameras |
| ソフトウェア / AI | Dedicated control software for weld-path following with closed-loop motor control |
画像


投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the MagCrawler?
MagCrawler is TSC Subsea's remotely operated magnetic crawler for subsea and splash-zone weld inspection, developed so that an ROV can deploy TSC Subsea's exclusive ACFM (Alternating Current Field Measurement) array probes onto circumferential welds in pipes and tubulars and onto fillet and full-penetration welds in pl…
Who makes the MagCrawler?
The MagCrawler is made by TSC Subsea, a robotics company based in United Kingdom.
How much does the MagCrawler cost?
TSC Subsea has not publicly announced pricing for the MagCrawler. You can enquire through RobotAIGeek for current pricing.
What is the MagCrawler used for?
The MagCrawler is designed for 点検 and モニタリング. It is used in エネルギー settings.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- MagCrawler vs ORCA Hull Inspection Crawler
- MagCrawler vs MAG Crawler
- MagCrawler vs A-UT Machine
- MagCrawler vs TRI Coal Conveyor Corridor Inspection Robot
- MagCrawler vs TRI Wind Turbine Nacelle Inspection Robot






