설명
SYB 3은(는) ISYBOT의 Collaborative-Robot입니다. 연삭, 연마, 도우미 용도로 설계되었습니다. 주요 수치: 가반 하중 10 kg, 도달 범위 1600 mm, 3 자유도.
The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day. It has three servo-controlled axes, a 1.6 m reach and a 10 kg payload over the whole work zone, is rated IP54 and moves at up to 1 m/s in collaborative mode. A sanding end-effector is available, with fine pressure control and dust extraction at source. It is built around ISYBOT's patented ball-screw-and-cable actuator (SCA-B), which gives low inertia and friction so the arm is light to hand-guide, and allows force control without force sensors. The cobot sits on a mobile cart that runs on 230 V, 16 A mains and can be wheeled anywhere on the shop floor. Operators teach it with two-button hand-guided programming and a control panel that stores trajectories and process parameters, and it has four operating modes: assistance, playback, parallel work and remote control, the last using a teleoperation pole to steer it from the ground.
주요 기능
- 3 servo-controlled axes
- 1.6 m reach
- 10 kg payload over the whole work zone
- Up to 1 m/s in collaborative mode
- IP54 protection
- Patented ball-screw-and-cable actuator (SCA-B): low inertia and friction
- Sensorless force control
- fine pressure control for sanding
- Sanding end-effector with dust extraction at source
- Mobile cart, 230 V / 16 A mains, deployable anywhere on the shop floor
- Two-button hand-guided programming
- control panel stores trajectories and process parameters
- Modes: assistance, playback, parallel work, remote control
- Teleoperation pole for steering from the ground
- Available on short- and long-term operating lease
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 10 kg |
|---|---|
| 도달거리 | 1.6 m |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 3 |
| 속도 | 3.6 km/h |
| 작동 환경 | Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54 |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 10 kg |
|---|---|
| 도달거리 | 1.6 m |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 3 |
| 속도 | 3.6 km/h |
| 작동 환경 | Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54 |
이미지








이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the SYB 3?
The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day.
Who makes the SYB 3?
The SYB 3 is made by ISYBOT, a robotics company based in France.
How much does the SYB 3 cost?
ISYBOT has not publicly announced pricing for the SYB 3. You can enquire through RobotAIGeek for current pricing.
What is the SYB 3 used for?
The SYB 3 is designed for 연삭, 연마, 도우미, and 원격. It is used in 건설 and 제조 settings.
What is the payload capacity of the SYB 3?
The SYB 3 has a payload capacity of 10 kg and a reach of 1.6 m.
How fast is the SYB 3?
The SYB 3 can move at speeds of up to 3.6 km/h.
How many degrees of freedom does the SYB 3 have?
The SYB 3 has 3 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- SYB 3 vs Neuromeka OPTi5
- SYB 3 vs Neuromeka Indy7 V3
- SYB 3 vs Neuromeka Indy12 V3
- SYB 3 vs Neuromeka NURI7c
- SYB 3 vs Neuromeka NURI12c












