★尚未評分

SYB 3

Collaborative-RobotFranceFrance已發布
SYB 3
比較
來源:
價格:
尚未公布

描述

SYB 3是ISYBOT的Collaborative-Robot。 面向研磨、拋光、幫助設計。 關鍵數據:負載 10 kg、臂展 1600 mm、3 自由度。

The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day. It has three servo-controlled axes, a 1.6 m reach and a 10 kg payload over the whole work zone, is rated IP54 and moves at up to 1 m/s in collaborative mode. A sanding end-effector is available, with fine pressure control and dust extraction at source. It is built around ISYBOT's patented ball-screw-and-cable actuator (SCA-B), which gives low inertia and friction so the arm is light to hand-guide, and allows force control without force sensors. The cobot sits on a mobile cart that runs on 230 V, 16 A mains and can be wheeled anywhere on the shop floor. Operators teach it with two-button hand-guided programming and a control panel that stores trajectories and process parameters, and it has four operating modes: assistance, playback, parallel work and remote control, the last using a teleoperation pole to steer it from the ground.

功能特色

  • 3 servo-controlled axes
  • 1.6 m reach
  • 10 kg payload over the whole work zone
  • Up to 1 m/s in collaborative mode
  • IP54 protection
  • Patented ball-screw-and-cable actuator (SCA-B): low inertia and friction
  • Sensorless force control
  • fine pressure control for sanding
  • Sanding end-effector with dust extraction at source
  • Mobile cart, 230 V / 16 A mains, deployable anywhere on the shop floor
  • Two-button hand-guided programming
  • control panel stores trajectories and process parameters
  • Modes: assistance, playback, parallel work, remote control
  • Teleoperation pole for steering from the ground
  • Available on short- and long-term operating lease

技術規格

已驗證
物理參數
負載10 kg
臂展1.6 m
移動能力
移動類型文具
自由度3
速度3.6 km/h
作業環境Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54
來源:製造商官網來源:第三方暫無來源來源狀態基於該機器人已登記的資料來源。

機器人論壇

正在載入論壇...

常見問題

What is the SYB 3?

The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day.

Who makes the SYB 3?

The SYB 3 is made by ISYBOT, a robotics company based in France.

How much does the SYB 3 cost?

ISYBOT has not publicly announced pricing for the SYB 3. You can enquire through RobotAIGeek for current pricing.

What is the SYB 3 used for?

The SYB 3 is designed for 研磨, 拋光, 幫助, and 遠端. It is used in 建築 and 製造業 settings.

What is the payload capacity of the SYB 3?

The SYB 3 has a payload capacity of 10 kg and a reach of 1.6 m.

How fast is the SYB 3?

The SYB 3 can move at speeds of up to 3.6 km/h.

How many degrees of freedom does the SYB 3 have?

The SYB 3 has 3 degrees of freedom.

與同類機器人對比

看看這款機器人與最接近的同類產品相比表現如何

SYB 3 的替代選擇 →

相關機器人

查看更多 >

訂閱獲取最新機器人資訊?