RobotAIGeek
★評価はまだありません

SYB 3

Collaborative-RobotFranceFranceリリース済み
SYB 3
比較
情報源:
価格:
未発表

説明

SYB 3はISYBOTのCollaborative-Robotです。 研削、研磨、お手伝い向けに設計されています。 主な数値:可搬質量 10 kg、リーチ 1600 mm、3 自由度。

The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day. It has three servo-controlled axes, a 1.6 m reach and a 10 kg payload over the whole work zone, is rated IP54 and moves at up to 1 m/s in collaborative mode. A sanding end-effector is available, with fine pressure control and dust extraction at source. It is built around ISYBOT's patented ball-screw-and-cable actuator (SCA-B), which gives low inertia and friction so the arm is light to hand-guide, and allows force control without force sensors. The cobot sits on a mobile cart that runs on 230 V, 16 A mains and can be wheeled anywhere on the shop floor. Operators teach it with two-button hand-guided programming and a control panel that stores trajectories and process parameters, and it has four operating modes: assistance, playback, parallel work and remote control, the last using a teleoperation pole to steer it from the ground.

特長

  • 3 servo-controlled axes
  • 1.6 m reach
  • 10 kg payload over the whole work zone
  • Up to 1 m/s in collaborative mode
  • IP54 protection
  • Patented ball-screw-and-cable actuator (SCA-B): low inertia and friction
  • Sensorless force control
  • fine pressure control for sanding
  • Sanding end-effector with dust extraction at source
  • Mobile cart, 230 V / 16 A mains, deployable anywhere on the shop floor
  • Two-button hand-guided programming
  • control panel stores trajectories and process parameters
  • Modes: assistance, playback, parallel work, remote control
  • Teleoperation pole for steering from the ground
  • Available on short- and long-term operating lease

技術仕様

検証済み
本体
可搬重量10 kg
リーチ1.6 m
移動性能
移動方式固定型
自由度3
速度3.6 km/h
使用環境Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the SYB 3?

The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day.

Who makes the SYB 3?

The SYB 3 is made by ISYBOT, a robotics company based in France.

How much does the SYB 3 cost?

ISYBOT has not publicly announced pricing for the SYB 3. You can enquire through RobotAIGeek for current pricing.

What is the SYB 3 used for?

The SYB 3 is designed for 研削, 研磨, お手伝い, and リモート. It is used in 建設 and 製造 settings.

What is the payload capacity of the SYB 3?

The SYB 3 has a payload capacity of 10 kg and a reach of 1.6 m.

How fast is the SYB 3?

The SYB 3 can move at speeds of up to 3.6 km/h.

How many degrees of freedom does the SYB 3 have?

The SYB 3 has 3 degrees of freedom.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

SYB 3 の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?