BESCHREIBUNG
SYB 3 ist ein Collaborative-Robot von ISYBOT. Er ist für Schleifen, Polieren, Hilfe ausgelegt. Eckdaten: 10 kg Traglast, 1600 mm Reichweite, 3 Freiheitsgrade.
The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day. It has three servo-controlled axes, a 1.6 m reach and a 10 kg payload over the whole work zone, is rated IP54 and moves at up to 1 m/s in collaborative mode. A sanding end-effector is available, with fine pressure control and dust extraction at source. It is built around ISYBOT's patented ball-screw-and-cable actuator (SCA-B), which gives low inertia and friction so the arm is light to hand-guide, and allows force control without force sensors. The cobot sits on a mobile cart that runs on 230 V, 16 A mains and can be wheeled anywhere on the shop floor. Operators teach it with two-button hand-guided programming and a control panel that stores trajectories and process parameters, and it has four operating modes: assistance, playback, parallel work and remote control, the last using a teleoperation pole to steer it from the ground.
FUNKTIONEN
- 3 servo-controlled axes
- 1.6 m reach
- 10 kg payload over the whole work zone
- Up to 1 m/s in collaborative mode
- IP54 protection
- Patented ball-screw-and-cable actuator (SCA-B): low inertia and friction
- Sensorless force control
- fine pressure control for sanding
- Sanding end-effector with dust extraction at source
- Mobile cart, 230 V / 16 A mains, deployable anywhere on the shop floor
- Two-button hand-guided programming
- control panel stores trajectories and process parameters
- Modes: assistance, playback, parallel work, remote control
- Teleoperation pole for steering from the ground
- Available on short- and long-term operating lease
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Traglast | 10 kg |
|---|---|
| Reichweite | 1.6 m |
| Mobilität | |
| Bewegungsart | Stationär |
| Freiheitsgrade | 3 |
| Geschwindigkeit | 3.6 km/h |
| Einsatzumgebung | Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54 |
ROBOTER-FOREN
Foren werden geladen...
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Traglast | 10 kg |
|---|---|
| Reichweite | 1.6 m |
| Mobilität | |
| Bewegungsart | Stationär |
| Freiheitsgrade | 3 |
| Geschwindigkeit | 3.6 km/h |
| Einsatzumgebung | Factory floors and workshops; finishing of large parts such as rail car panels, aircraft and boat parts, IP54 |
Bilder








Bildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the SYB 3?
The SYB 3 is ISYBOT's collaborative robot (cobot) for manual finishing work such as sanding and grinding, designed to take tiring, repetitive surface preparation off operators without changing the workstation; ISYBOT says a finishing task can be automated in less than half a day.
Who makes the SYB 3?
The SYB 3 is made by ISYBOT, a robotics company based in France.
How much does the SYB 3 cost?
ISYBOT has not publicly announced pricing for the SYB 3. You can enquire through RobotAIGeek for current pricing.
What is the SYB 3 used for?
The SYB 3 is designed for schleifen, polieren, hilfe, and fernsteuerung. It is used in bauwesen and fertigung settings.
What is the payload capacity of the SYB 3?
The SYB 3 has a payload capacity of 10 kg and a reach of 1.6 m.
How fast is the SYB 3?
The SYB 3 can move at speeds of up to 3.6 km/h.
How many degrees of freedom does the SYB 3 have?
The SYB 3 has 3 degrees of freedom.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
- SYB 3 vs Neuromeka OPTi5
- SYB 3 vs Neuromeka Indy7 V3
- SYB 3 vs Neuromeka Indy12 V3
- SYB 3 vs Neuromeka NURI7c
- SYB 3 vs Neuromeka NURI12c












