★아직 평가 없음

e-puck2

Educational-RobotsSwitzerlandSwitzerland출시됨
e-puck2
비교
가격:
미공개
출시:
2018

설명

e-puck2은(는) GCtronic의 Educational-Robots입니다. 연구, 교육 용도로 설계되었습니다. 주요 수치: 0.1 kg, 가동 시간 180분, 가격 850 CHF, 2018년 출시.

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units. Developed jointly by EPFL and GCtronic and available since January 2018, it keeps the original's 70 mm round shape and mechanics, and stays compatible with most e-puck scenarios and extensions, while adding a far more powerful controller, USB, a time-of-flight distance sensor and WiFi. A 32-bit STM32F407 at 168 MHz with DSP and FPU runs it, with 192 KB of RAM and 1 MB of flash. It senses its surroundings with 8 infrared proximity and ambient-light sensors, a front time-of-flight sensor reaching 2 m, a 3D accelerometer, gyro and magnetometer, 4 digital microphones for sound localisation, a VGA colour camera and an infrared remote-control receiver, and shows its state through red and RGB LEDs, a green body light and a speaker. Two stepper motors drive it at up to about 15.4 cm/s, and a 1,800 mAh Li-ion battery charged over USB gives about 3 hours of autonomy. It connects by USB, Bluetooth, BLE and WiFi, has a micro SD slot and an onboard debugger, and is programmed in C, MicroPython or the Webots simulator.

주요 기능

  • 70 mm diameter, 45 mm high, 130 g
  • STM32F407 168 MHz, 192 KB RAM, 1 MB flash
  • 8 IR proximity/ambient light sensors
  • Time-of-flight distance sensor up to 2 m
  • 3D accelerometer, gyro and magnetometer
  • 4 digital microphones for sound localisation
  • VGA colour camera
  • Up to about 15.4 cm/s with 2 stepper motors
  • 1,800 mAh battery, about 3 h autonomy, USB charging
  • USB, Bluetooth 2.0, BLE, WiFi
  • micro SD slot
  • C, MicroPython, Webots
  • onboard GDB debugger
  • Compatible with e-puck extensions such as Pi-puck

기술 사양

검증됨
물리 사양
무게0.13 kg
크기L 70 mm × W 70 mm × H 45 mm
이동성
이동 방식바퀴형
속도0.55 km/h
작동 환경Indoor classrooms and research labs, on tables and arenas
전원
배터리 지속 시간180 min
센싱 & 컴퓨팅
센서8 IR proximity and ambient light sensors; time-of-flight distance sensor (up to 2 m); 3D accelerometer, 3D gyro, 3D magnetometer; 4 digital microphones; VGA colour camera; IR remote-control receiver
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the e-puck2?

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units.

Who makes the e-puck2?

The e-puck2 is made by GCtronic, a robotics company based in Switzerland.

How much does the e-puck2 cost?

The e-puck2 is priced at around 850 CHF.

What is the e-puck2 used for?

The e-puck2 is designed for 연구 and 교육. It is used in 연구 and 교육 settings.

How much does the e-puck2 weigh?

The e-puck2 weighs 0.13 kg.

How fast is the e-puck2?

The e-puck2 can move at speeds of up to 0.55 km/h.

What is the battery life of the e-puck2?

The e-puck2 runs for about 180 minutes on a charge.

When was the e-puck2 released?

The e-puck2 was released in 2018.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

e-puck2 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?