★尚未评分

e-puck2

Educational-RobotsSwitzerlandSwitzerland已发布
e-puck2
对比
来源:
行业:
用途:
价格:
未公布
发布年份:
2018

描述

e-puck2是GCtronic的Educational-Robots。 面向研究、教育设计。 关键数据:0.1 kg、续航 180 分钟、价格 850 CHF、2018 年发布。

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units. Developed jointly by EPFL and GCtronic and available since January 2018, it keeps the original's 70 mm round shape and mechanics, and stays compatible with most e-puck scenarios and extensions, while adding a far more powerful controller, USB, a time-of-flight distance sensor and WiFi. A 32-bit STM32F407 at 168 MHz with DSP and FPU runs it, with 192 KB of RAM and 1 MB of flash. It senses its surroundings with 8 infrared proximity and ambient-light sensors, a front time-of-flight sensor reaching 2 m, a 3D accelerometer, gyro and magnetometer, 4 digital microphones for sound localisation, a VGA colour camera and an infrared remote-control receiver, and shows its state through red and RGB LEDs, a green body light and a speaker. Two stepper motors drive it at up to about 15.4 cm/s, and a 1,800 mAh Li-ion battery charged over USB gives about 3 hours of autonomy. It connects by USB, Bluetooth, BLE and WiFi, has a micro SD slot and an onboard debugger, and is programmed in C, MicroPython or the Webots simulator.

功能特点

  • 70 mm diameter, 45 mm high, 130 g
  • STM32F407 168 MHz, 192 KB RAM, 1 MB flash
  • 8 IR proximity/ambient light sensors
  • Time-of-flight distance sensor up to 2 m
  • 3D accelerometer, gyro and magnetometer
  • 4 digital microphones for sound localisation
  • VGA colour camera
  • Up to about 15.4 cm/s with 2 stepper motors
  • 1,800 mAh battery, about 3 h autonomy, USB charging
  • USB, Bluetooth 2.0, BLE, WiFi
  • micro SD slot
  • C, MicroPython, Webots
  • onboard GDB debugger
  • Compatible with e-puck extensions such as Pi-puck

技术规格

已验证
物理参数
重量0.13 kg
外形尺寸L 70 mm × W 70 mm × H 45 mm
移动能力
运动类型带轮的
速度0.55 km/h
作业环境Indoor classrooms and research labs, on tables and arenas
电源与续航
续航时间180 min
感知与计算
传感器8 IR proximity and ambient light sensors; time-of-flight distance sensor (up to 2 m); 3D accelerometer, 3D gyro, 3D magnetometer; 4 digital microphones; VGA colour camera; IR remote-control receiver
来源:制造商官网来源:第三方暂无来源来源状态基于该机器人已登记的资料来源。

机器人论坛

正在加载论坛...

常见问题

What is the e-puck2?

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units.

Who makes the e-puck2?

The e-puck2 is made by GCtronic, a robotics company based in Switzerland.

How much does the e-puck2 cost?

The e-puck2 is priced at around 850 CHF.

What is the e-puck2 used for?

The e-puck2 is designed for 研究 and 教育. It is used in 研究 and 教育 settings.

How much does the e-puck2 weigh?

The e-puck2 weighs 0.13 kg.

How fast is the e-puck2?

The e-puck2 can move at speeds of up to 0.55 km/h.

What is the battery life of the e-puck2?

The e-puck2 runs for about 180 minutes on a charge.

When was the e-puck2 released?

The e-puck2 was released in 2018.

与同类机器人对比

看看这款机器人与最接近的同类产品相比表现如何

e-puck2 的替代选择 →

相关机器人

查看更多 >

订阅获取最新机器人资讯?