描述
e-puck2是GCtronic的Educational-Robots。 面向研究、教育設計。 關鍵數據:0.1 kg、續航 180 分鐘、價格 850 CHF、2018 年發布。
The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units. Developed jointly by EPFL and GCtronic and available since January 2018, it keeps the original's 70 mm round shape and mechanics, and stays compatible with most e-puck scenarios and extensions, while adding a far more powerful controller, USB, a time-of-flight distance sensor and WiFi. A 32-bit STM32F407 at 168 MHz with DSP and FPU runs it, with 192 KB of RAM and 1 MB of flash. It senses its surroundings with 8 infrared proximity and ambient-light sensors, a front time-of-flight sensor reaching 2 m, a 3D accelerometer, gyro and magnetometer, 4 digital microphones for sound localisation, a VGA colour camera and an infrared remote-control receiver, and shows its state through red and RGB LEDs, a green body light and a speaker. Two stepper motors drive it at up to about 15.4 cm/s, and a 1,800 mAh Li-ion battery charged over USB gives about 3 hours of autonomy. It connects by USB, Bluetooth, BLE and WiFi, has a micro SD slot and an onboard debugger, and is programmed in C, MicroPython or the Webots simulator.
功能特色
- 70 mm diameter, 45 mm high, 130 g
- STM32F407 168 MHz, 192 KB RAM, 1 MB flash
- 8 IR proximity/ambient light sensors
- Time-of-flight distance sensor up to 2 m
- 3D accelerometer, gyro and magnetometer
- 4 digital microphones for sound localisation
- VGA colour camera
- Up to about 15.4 cm/s with 2 stepper motors
- 1,800 mAh battery, about 3 h autonomy, USB charging
- USB, Bluetooth 2.0, BLE, WiFi
- micro SD slot
- C, MicroPython, Webots
- onboard GDB debugger
- Compatible with e-puck extensions such as Pi-puck
技術規格
已驗證| 物理參數 | |
| 重量 | 0.13 kg |
|---|---|
| 外形尺寸 | L 70 mm × W 70 mm × H 45 mm |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 0.55 km/h |
| 作業環境 | Indoor classrooms and research labs, on tables and arenas |
| 電源與續航 | |
| 續航時間 | 180 min |
| 感知與計算 | |
| 感測器 | 8 IR proximity and ambient light sensors; time-of-flight distance sensor (up to 2 m); 3D accelerometer, 3D gyro, 3D magnetometer; 4 digital microphones; VGA colour camera; IR remote-control receiver |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 0.13 kg |
|---|---|
| 外形尺寸 | L 70 mm × W 70 mm × H 45 mm |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 0.55 km/h |
| 作業環境 | Indoor classrooms and research labs, on tables and arenas |
| 電源與續航 | |
| 續航時間 | 180 min |
| 感知與計算 | |
| 感測器 | 8 IR proximity and ambient light sensors; time-of-flight distance sensor (up to 2 m); 3D accelerometer, 3D gyro, 3D magnetometer; 4 digital microphones; VGA colour camera; IR remote-control receiver |
圖片



圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the e-puck2?
The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units.
Who makes the e-puck2?
The e-puck2 is made by GCtronic, a robotics company based in Switzerland.
How much does the e-puck2 cost?
The e-puck2 is priced at around 850 CHF.
What is the e-puck2 used for?
The e-puck2 is designed for 研究 and 教育. It is used in 研究 and 教育 settings.
How much does the e-puck2 weigh?
The e-puck2 weighs 0.13 kg.
How fast is the e-puck2?
The e-puck2 can move at speeds of up to 0.55 km/h.
What is the battery life of the e-puck2?
The e-puck2 runs for about 180 minutes on a charge.
When was the e-puck2 released?
The e-puck2 was released in 2018.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- e-puck2 vs Mecabot 2
- e-puck2 vs Mecabot Pro
- e-puck2 vs Mecabot Plus
- e-puck2 vs Mecabot X
- e-puck2 vs Rosbot Pro








