RobotAIGeek
★Noch nicht bewertet

e-puck2

Educational-RobotsSwitzerlandSwitzerlandVeröffentlicht
e-puck2
Vergleichen
Quellen:
Anwendungen:
Preis:
Nicht angekündigt
Veröffentlicht:
2018

BESCHREIBUNG

e-puck2 ist ein Educational-Robots von GCtronic. Er ist für Forschung, Bildung ausgelegt. Eckdaten: 0.1 kg, 180 min Laufzeit, Preis 850 CHF, erschienen 2018.

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units. Developed jointly by EPFL and GCtronic and available since January 2018, it keeps the original's 70 mm round shape and mechanics, and stays compatible with most e-puck scenarios and extensions, while adding a far more powerful controller, USB, a time-of-flight distance sensor and WiFi. A 32-bit STM32F407 at 168 MHz with DSP and FPU runs it, with 192 KB of RAM and 1 MB of flash. It senses its surroundings with 8 infrared proximity and ambient-light sensors, a front time-of-flight sensor reaching 2 m, a 3D accelerometer, gyro and magnetometer, 4 digital microphones for sound localisation, a VGA colour camera and an infrared remote-control receiver, and shows its state through red and RGB LEDs, a green body light and a speaker. Two stepper motors drive it at up to about 15.4 cm/s, and a 1,800 mAh Li-ion battery charged over USB gives about 3 hours of autonomy. It connects by USB, Bluetooth, BLE and WiFi, has a micro SD slot and an onboard debugger, and is programmed in C, MicroPython or the Webots simulator.

FUNKTIONEN

  • 70 mm diameter, 45 mm high, 130 g
  • STM32F407 168 MHz, 192 KB RAM, 1 MB flash
  • 8 IR proximity/ambient light sensors
  • Time-of-flight distance sensor up to 2 m
  • 3D accelerometer, gyro and magnetometer
  • 4 digital microphones for sound localisation
  • VGA colour camera
  • Up to about 15.4 cm/s with 2 stepper motors
  • 1,800 mAh battery, about 3 h autonomy, USB charging
  • USB, Bluetooth 2.0, BLE, WiFi
  • micro SD slot
  • C, MicroPython, Webots
  • onboard GDB debugger
  • Compatible with e-puck extensions such as Pi-puck

TECHNISCHE DATEN

Verifiziert
Physisch
Gewicht0.13 kg
AbmessungenL 70 mm × W 70 mm × H 45 mm
Mobilität
BewegungsartRadbasiert
Geschwindigkeit0.55 km/h
EinsatzumgebungIndoor classrooms and research labs, on tables and arenas
Energie
Akkulaufzeit180 min
Sensorik & Rechenleistung
Sensoren8 IR proximity and ambient light sensors; time-of-flight distance sensor (up to 2 m); 3D accelerometer, 3D gyro, 3D magnetometer; 4 digital microphones; VGA colour camera; IR remote-control receiver
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

HÄUFIG GESTELLTE FRAGEN

What is the e-puck2?

The e-puck2 is a miniature mobile robot for education and research, version 2 of the e-puck that EPFL introduced in 2005 and that has been used in about 3,000 units.

Who makes the e-puck2?

The e-puck2 is made by GCtronic, a robotics company based in Switzerland.

How much does the e-puck2 cost?

The e-puck2 is priced at around 850 CHF.

What is the e-puck2 used for?

The e-puck2 is designed for forschung and bildung. It is used in forschung and bildung settings.

How much does the e-puck2 weigh?

The e-puck2 weighs 0.13 kg.

How fast is the e-puck2?

The e-puck2 can move at speeds of up to 0.55 km/h.

What is the battery life of the e-puck2?

The e-puck2 runs for about 180 minutes on a charge.

When was the e-puck2 released?

The e-puck2 was released in 2018.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu e-puck2 →

ÄHNLICHE ROBOTER

MEHR ANZEIGEN >

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?