描述
SR-Surveyor M1.8是SeaRobotics的Research-Robots。 面向資料蒐集、製圖、測量設計。
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue. The M stands for its multibeam echosounder, a special-version EdgeTech 2205 that gives 540 kHz wide-swath bathymetry at an 8:1 coverage-to-depth ratio together with 1,600 kHz high-resolution, 540 kHz motion-tolerant and low-frequency side scan and backscatter. Payload bays packed into the pontoons hold a SonTek M9 ADCP for current profiling and bottom tracking, or a DVL, plus an AML micro SV sound-velocity sensor, and an SBG dual-antenna RTK INS handles positioning. A Velodyne Puck LiDAR maps the shore in 360 degrees for inspecting near-shore pipelines, bridges, piers and rigs, so it can capture side scan, bathymetry, backscatter, LiDAR point clouds and discharge data at once.
功能特色
- 1.8 m man-portable ASV
- EdgeTech 2205 (special version) multibeam echosounder, 540 kHz, 8:1 coverage
- Side scan at 1600 kHz, 540 kHz motion-tolerant and low frequency
- Velodyne Puck LiDAR for 360-degree terrestrial mapping
- SBG dual-antenna RTK INS
- SonTek M9 ADCP and AML micro SV sensor
- Simultaneous side scan, bathymetry, backscatter, LiDAR and discharge data
技術規格
已驗證| 物理參數 | |
| 外形尺寸 | L 1.8 m |
|---|---|
| 移動能力 | |
| 移動類型 | 水生 |
| 作業環境 | Shallow and hard-to-navigate waters, near-shore infrastructure |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 外形尺寸 | L 1.8 m |
|---|---|
| 移動能力 | |
| 移動類型 | 水生 |
| 作業環境 | Shallow and hard-to-navigate waters, near-shore infrastructure |
圖片



圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue.
Who makes the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is made by SeaRobotics, a robotics company based in United States.
How much does the SR-Surveyor M1.8 cost?
SeaRobotics has not publicly announced pricing for the SR-Surveyor M1.8. You can enquire through RobotAIGeek for current pricing.
What is the SR-Surveyor M1.8 used for?
The SR-Surveyor M1.8 is designed for 資料蒐集, 製圖, 測量, and 檢查. It is used in 能源, 政府, 研究, and 建築 settings.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- SR-Surveyor M1.8 vs NETRA AUV
- SR-Surveyor M1.8 vs UUR
- SR-Surveyor M1.8 vs AQUA-SCANNER
- SR-Surveyor M1.8 vs Lotsman
- SR-Surveyor M1.8 vs R-45







