설명
SR-Surveyor M1.8은(는) SeaRobotics의 Research-Robots입니다. 데이터 수집, 매핑, 측량 용도로 설계되었습니다.
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue. The M stands for its multibeam echosounder, a special-version EdgeTech 2205 that gives 540 kHz wide-swath bathymetry at an 8:1 coverage-to-depth ratio together with 1,600 kHz high-resolution, 540 kHz motion-tolerant and low-frequency side scan and backscatter. Payload bays packed into the pontoons hold a SonTek M9 ADCP for current profiling and bottom tracking, or a DVL, plus an AML micro SV sound-velocity sensor, and an SBG dual-antenna RTK INS handles positioning. A Velodyne Puck LiDAR maps the shore in 360 degrees for inspecting near-shore pipelines, bridges, piers and rigs, so it can capture side scan, bathymetry, backscatter, LiDAR point clouds and discharge data at once.
주요 기능
- 1.8 m man-portable ASV
- EdgeTech 2205 (special version) multibeam echosounder, 540 kHz, 8:1 coverage
- Side scan at 1600 kHz, 540 kHz motion-tolerant and low frequency
- Velodyne Puck LiDAR for 360-degree terrestrial mapping
- SBG dual-antenna RTK INS
- SonTek M9 ADCP and AML micro SV sensor
- Simultaneous side scan, bathymetry, backscatter, LiDAR and discharge data
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1.8 m |
|---|---|
| 이동성 | |
| 이동 방식 | 수중형 |
| 작동 환경 | Shallow and hard-to-navigate waters, near-shore infrastructure |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1.8 m |
|---|---|
| 이동성 | |
| 이동 방식 | 수중형 |
| 작동 환경 | Shallow and hard-to-navigate waters, near-shore infrastructure |
이미지
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue.
Who makes the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is made by SeaRobotics, a robotics company based in United States.
How much does the SR-Surveyor M1.8 cost?
SeaRobotics has not publicly announced pricing for the SR-Surveyor M1.8. You can enquire through RobotAIGeek for current pricing.
What is the SR-Surveyor M1.8 used for?
The SR-Surveyor M1.8 is designed for 데이터 수집, 매핑, 측량, and 점검. It is used in 에너지, 공공·정부, 연구, and 건설 settings.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- SR-Surveyor M1.8 vs NETRA AUV
- SR-Surveyor M1.8 vs UUR
- SR-Surveyor M1.8 vs AQUA-SCANNER
- SR-Surveyor M1.8 vs Lotsman
- SR-Surveyor M1.8 vs R-45
