説明
SR-Surveyor M1.8はSeaRoboticsのResearch-Robotsです。 データ収集、マッピング、測量向けに設計されています。
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue. The M stands for its multibeam echosounder, a special-version EdgeTech 2205 that gives 540 kHz wide-swath bathymetry at an 8:1 coverage-to-depth ratio together with 1,600 kHz high-resolution, 540 kHz motion-tolerant and low-frequency side scan and backscatter. Payload bays packed into the pontoons hold a SonTek M9 ADCP for current profiling and bottom tracking, or a DVL, plus an AML micro SV sound-velocity sensor, and an SBG dual-antenna RTK INS handles positioning. A Velodyne Puck LiDAR maps the shore in 360 degrees for inspecting near-shore pipelines, bridges, piers and rigs, so it can capture side scan, bathymetry, backscatter, LiDAR point clouds and discharge data at once.
特長
- 1.8 m man-portable ASV
- EdgeTech 2205 (special version) multibeam echosounder, 540 kHz, 8:1 coverage
- Side scan at 1600 kHz, 540 kHz motion-tolerant and low frequency
- Velodyne Puck LiDAR for 360-degree terrestrial mapping
- SBG dual-antenna RTK INS
- SonTek M9 ADCP and AML micro SV sensor
- Simultaneous side scan, bathymetry, backscatter, LiDAR and discharge data
技術仕様
検証済み| 本体 | |
| 寸法 | L 1.8 m |
|---|---|
| 移動性能 | |
| 移動方式 | 水中型 |
| 使用環境 | Shallow and hard-to-navigate waters, near-shore infrastructure |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 寸法 | L 1.8 m |
|---|---|
| 移動性能 | |
| 移動方式 | 水中型 |
| 使用環境 | Shallow and hard-to-navigate waters, near-shore infrastructure |
画像



投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is SeaRobotics' 1.8 m man-portable autonomous surface vehicle, built to simplify logistics and collect high-quality data in shallow and hard-to-navigate areas for bathymetry, habitat mapping, structure inspection and search and rescue.
Who makes the SR-Surveyor M1.8?
The SR-Surveyor M1.8 is made by SeaRobotics, a robotics company based in United States.
How much does the SR-Surveyor M1.8 cost?
SeaRobotics has not publicly announced pricing for the SR-Surveyor M1.8. You can enquire through RobotAIGeek for current pricing.
What is the SR-Surveyor M1.8 used for?
The SR-Surveyor M1.8 is designed for データ収集, マッピング, 測量, and 点検. It is used in エネルギー, 政府・公共, 研究, and 建設 settings.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- SR-Surveyor M1.8 vs NETRA AUV
- SR-Surveyor M1.8 vs UUR
- SR-Surveyor M1.8 vs AQUA-SCANNER
- SR-Surveyor M1.8 vs Lotsman
- SR-Surveyor M1.8 vs R-45







