RobotAIGeek
★尚未评分

WUBA D12

HumanoidChinaChina已发布
WUBA D12
对比
来源:
用途:
拾放研究General-purpose humanoid workresearch and secondary developmenthuman-machine interactiondemonstration and service
价格:
未公布

描述

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under load is a hazard. Articulation is generous: seven degrees of freedom per arm so the hand can reach any point in the working volume at a chosen wrist angle, six per leg for walking, running and stairs, and twelve per hand across a five-fingered design that supports several grasp modes and fine manipulation. Its feet are force-controlled with multiple degrees of freedom, letting it adapt to uneven ground rather than merely tolerate it. Perception combines a hybrid solid-state 3D LiDAR giving 360-degree stereo coverage with dual depth stereo cameras for multi-layer distributed perception, fused for navigation and obstacle avoidance. A high-resolution curved LCD serves as its face for expressive interaction. It walks at 3.6 km/h, tops out at 6.5 km/h, carries 20 kg, works within a 750 mm radius and runs two hours, with EtherCAT, WiFi and 5G links and support for secondary development.

功能特点

  • 175 cm tall and 65 kg including battery
  • 42 total degrees of freedom
  • 7 degrees of freedom per arm, 12 per hand across a five-fingered dexterous design, and 6 per leg
  • High-performance integrated joints with a maximum torque of 300 N·m
  • Feet with multi-degree-of-freedom force control for adaptive traversal of uneven terrain
  • Hybrid solid-state 3D LiDAR providing 360 degree stereo perception
  • Dual depth stereo cameras for multi-layer distributed perception
  • High-resolution curved LCD for human-machine interaction
  • Walking speed 3.6 km/h with a maximum speed of 6.5 km/h
  • Payload 20 kg
  • working radius 750 mm
  • endurance 2 hours
  • LiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance
  • Communication over EtherCAT, WiFi and 5G
  • Emergency stop button and audible and visual alarm included
  • Supports secondary development

技术规格

已验证
物理参数
重量65 kg
外形尺寸H 1.75 m
负载20 kg
移动能力
运动类型两足行走, 类人机器人
自由度42
速度6.52 km/h
作业环境Indoor and outdoor general environments
执行器Bipedal humanoid with integrated joints rated to 300 N·m, five-fingered dexterous hands and force-controlled multi-DoF feet
电源与续航
续航时间2 h
感知与计算
传感器hybrid solid-state 3D LiDAR, dual depth stereo cameras
软件 / AILiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance; supports secondary development
来源:制造商官网来源:第三方暂无来源来源状态基于该机器人已登记的资料来源。

常见问题

What is the WUBA D12?

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under lo…

Who makes the WUBA D12?

The WUBA D12 is made by WUBA Intelligent Technology, a robotics company based in China.

How much does the WUBA D12 cost?

WUBA Intelligent Technology has not publicly announced pricing for the WUBA D12. You can enquire through RobotAIGeek for current pricing.

What is the WUBA D12 used for?

The WUBA D12 is designed for 拾放, 研究, general-purpose humanoid work, and research and secondary development. It is used in 研究, 制造业, and 零售 settings.

What is the payload capacity of the WUBA D12?

The WUBA D12 has a payload capacity of 20 kg.

How much does the WUBA D12 weigh?

The WUBA D12 weighs 65 kg.

How fast is the WUBA D12?

The WUBA D12 can move at speeds of up to 6.52 km/h.

What is the battery life of the WUBA D12?

The WUBA D12 runs for 2 h on a charge.

与同类机器人对比

看看这款机器人与最接近的同类产品相比表现如何

WUBA D12 的替代选择 →

订阅获取最新机器人资讯?