RobotAIGeek
★評価はまだありません

WUBA D12

HumanoidChinaChinaリリース済み
WUBA D12
比較
情報源:
用途:
ピック&プレース研究General-purpose humanoid workresearch and secondary developmenthuman-machine interactiondemonstration and service
価格:
未発表

説明

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under load is a hazard. Articulation is generous: seven degrees of freedom per arm so the hand can reach any point in the working volume at a chosen wrist angle, six per leg for walking, running and stairs, and twelve per hand across a five-fingered design that supports several grasp modes and fine manipulation. Its feet are force-controlled with multiple degrees of freedom, letting it adapt to uneven ground rather than merely tolerate it. Perception combines a hybrid solid-state 3D LiDAR giving 360-degree stereo coverage with dual depth stereo cameras for multi-layer distributed perception, fused for navigation and obstacle avoidance. A high-resolution curved LCD serves as its face for expressive interaction. It walks at 3.6 km/h, tops out at 6.5 km/h, carries 20 kg, works within a 750 mm radius and runs two hours, with EtherCAT, WiFi and 5G links and support for secondary development.

特長

  • 175 cm tall and 65 kg including battery
  • 42 total degrees of freedom
  • 7 degrees of freedom per arm, 12 per hand across a five-fingered dexterous design, and 6 per leg
  • High-performance integrated joints with a maximum torque of 300 N·m
  • Feet with multi-degree-of-freedom force control for adaptive traversal of uneven terrain
  • Hybrid solid-state 3D LiDAR providing 360 degree stereo perception
  • Dual depth stereo cameras for multi-layer distributed perception
  • High-resolution curved LCD for human-machine interaction
  • Walking speed 3.6 km/h with a maximum speed of 6.5 km/h
  • Payload 20 kg
  • working radius 750 mm
  • endurance 2 hours
  • LiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance
  • Communication over EtherCAT, WiFi and 5G
  • Emergency stop button and audible and visual alarm included
  • Supports secondary development

技術仕様

検証済み
本体
重量65 kg
寸法H 1.75 m
可搬重量20 kg
移動性能
移動方式二足歩行, ヒューマノイド
自由度42
速度6.52 km/h
使用環境Indoor and outdoor general environments
アクチュエーターBipedal humanoid with integrated joints rated to 300 N·m, five-fingered dexterous hands and force-controlled multi-DoF feet
電源
バッテリー駆動時間2 h
センシング・演算
センサーhybrid solid-state 3D LiDAR, dual depth stereo cameras
ソフトウェア / AILiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance; supports secondary development
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

よくある質問

What is the WUBA D12?

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under lo…

Who makes the WUBA D12?

The WUBA D12 is made by WUBA Intelligent Technology, a robotics company based in China.

How much does the WUBA D12 cost?

WUBA Intelligent Technology has not publicly announced pricing for the WUBA D12. You can enquire through RobotAIGeek for current pricing.

What is the WUBA D12 used for?

The WUBA D12 is designed for ピック&プレース, 研究, general-purpose humanoid work, and research and secondary development. It is used in 研究, 製造, and 小売 settings.

What is the payload capacity of the WUBA D12?

The WUBA D12 has a payload capacity of 20 kg.

How much does the WUBA D12 weigh?

The WUBA D12 weighs 65 kg.

How fast is the WUBA D12?

The WUBA D12 can move at speeds of up to 6.52 km/h.

What is the battery life of the WUBA D12?

The WUBA D12 runs for 2 h on a charge.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

WUBA D12 の代替候補 →

最新ロボット情報を毎週ニュースレターで受け取りませんか?