RobotAIGeek
★아직 평가 없음

WUBA D12

HumanoidChinaChina출시됨
WUBA D12
비교
출처:
용도:
픽앤플레이스연구General-purpose humanoid workresearch and secondary developmenthuman-machine interactiondemonstration and service
가격:
미공개

설명

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under load is a hazard. Articulation is generous: seven degrees of freedom per arm so the hand can reach any point in the working volume at a chosen wrist angle, six per leg for walking, running and stairs, and twelve per hand across a five-fingered design that supports several grasp modes and fine manipulation. Its feet are force-controlled with multiple degrees of freedom, letting it adapt to uneven ground rather than merely tolerate it. Perception combines a hybrid solid-state 3D LiDAR giving 360-degree stereo coverage with dual depth stereo cameras for multi-layer distributed perception, fused for navigation and obstacle avoidance. A high-resolution curved LCD serves as its face for expressive interaction. It walks at 3.6 km/h, tops out at 6.5 km/h, carries 20 kg, works within a 750 mm radius and runs two hours, with EtherCAT, WiFi and 5G links and support for secondary development.

주요 기능

  • 175 cm tall and 65 kg including battery
  • 42 total degrees of freedom
  • 7 degrees of freedom per arm, 12 per hand across a five-fingered dexterous design, and 6 per leg
  • High-performance integrated joints with a maximum torque of 300 N·m
  • Feet with multi-degree-of-freedom force control for adaptive traversal of uneven terrain
  • Hybrid solid-state 3D LiDAR providing 360 degree stereo perception
  • Dual depth stereo cameras for multi-layer distributed perception
  • High-resolution curved LCD for human-machine interaction
  • Walking speed 3.6 km/h with a maximum speed of 6.5 km/h
  • Payload 20 kg
  • working radius 750 mm
  • endurance 2 hours
  • LiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance
  • Communication over EtherCAT, WiFi and 5G
  • Emergency stop button and audible and visual alarm included
  • Supports secondary development

기술 사양

검증됨
물리 사양
무게65 kg
크기H 1.75 m
가반하중20 kg
이동성
이동 방식이족보행, 휴머노이드
자유도42
속도6.52 km/h
작동 환경Indoor and outdoor general environments
액추에이터Bipedal humanoid with integrated joints rated to 300 N·m, five-fingered dexterous hands and force-controlled multi-DoF feet
전원
배터리 지속 시간2 h
센싱 & 컴퓨팅
센서hybrid solid-state 3D LiDAR, dual depth stereo cameras
소프트웨어 / AILiDAR-visual fusion navigation with laser-based and vision-based obstacle avoidance; supports secondary development
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

자주 묻는 질문

What is the WUBA D12?

The D12 is WUBA's full-size humanoid — 175 cm and 65 kg with its battery — and the specification that shapes it is the joint: high-performance integrated joints rated to 300 N·m, which the company frames as a safety and stability figure rather than a raw power claim, since a humanoid that cannot hold a posture under lo…

Who makes the WUBA D12?

The WUBA D12 is made by WUBA Intelligent Technology, a robotics company based in China.

How much does the WUBA D12 cost?

WUBA Intelligent Technology has not publicly announced pricing for the WUBA D12. You can enquire through RobotAIGeek for current pricing.

What is the WUBA D12 used for?

The WUBA D12 is designed for 픽앤플레이스, 연구, general-purpose humanoid work, and research and secondary development. It is used in 연구, 제조, and 리테일 settings.

What is the payload capacity of the WUBA D12?

The WUBA D12 has a payload capacity of 20 kg.

How much does the WUBA D12 weigh?

The WUBA D12 weighs 65 kg.

How fast is the WUBA D12?

The WUBA D12 can move at speeds of up to 6.52 km/h.

What is the battery life of the WUBA D12?

The WUBA D12 runs for 2 h on a charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

WUBA D12 대체 로봇 →

최신 로봇 소식을 매주 받아보시겠어요?