DESCRIPTION
T-iROBO UW is an Industrial-Robot from Taisei Corporation. It is built for Construction. Key figures: released 2014.
T-iROBO UW (UW for 'underwater') is Taisei Corporation's remote-controlled underwater work machine, developed in 2014 with the rental company Aktio and Kyokuto Kensetsu for dam renewal work that has to be done while the reservoir stays full. A shaft is lowered from a work barge to the lake bed and the work machine travels up and down it; interchangeable attachments let it break rock, excavate, remove debris, take precise depth soundings and film, all controlled remotely from an operating room on the barge, so divers, large cofferdams and tall temporary jetties are not needed. It has been used on dam renewal projects such as the Amagase Dam redevelopment. In 2023 Taisei added two hard-rock attachments - the T-A Slot Driller, which drills rows of overlapping holes with a down-the-hole hammer, and the T-A Rock Splitter, which drills and then splits rock with a hydraulic packer - and upgraded the machine guidance with rotary encoders that place the attachment tip to within about 5 cm, plus a fine-control mode that runs at one tenth of normal speed for precise remote positioning.
FEATURES
- Remote-controlled underwater work machine for dam renewal
- Travels up and down a shaft lowered from a work barge
- Interchangeable attachments: buckets, breakers, grapple, skeleton bucket, concrete dresser, dredger
- Hard-rock attachments T-A Slot Driller and T-A Rock Splitter (2023)
- Machine guidance with rotary encoders
- tip accuracy within about 5 cm
- Fine-control mode at 1/10 of normal speed
- Visualisation for remote operation from the barge
- Co-developed with Aktio and Kyokuto Kensetsu
TECHNICAL SPECIFICATIONS
| Mobility | |
| Movement Type | Other |
|---|---|
| Environment | Dam reservoirs and other deep, steep, low-visibility underwater sites, operated from a work barge |
ROBOT FORUMS
Loading forums...
TECHNICAL SPECIFICATIONS
| Mobility | |
| Movement Type | Other |
|---|---|
| Environment | Dam reservoirs and other deep, steep, low-visibility underwater sites, operated from a work barge |
Images



Image Contributions
Videos
ROBOT FORUMS
Loading forums...
RATINGS
FREQUENTLY ASKED QUESTIONS
What is the T-iROBO UW?
T-iROBO UW (UW for 'underwater') is Taisei Corporation's remote-controlled underwater work machine, developed in 2014 with the rental company Aktio and Kyokuto Kensetsu for dam renewal work that has to be done while the reservoir stays full.
Who makes the T-iROBO UW?
The T-iROBO UW is made by Taisei Corporation, a robotics company based in Japan.
How much does the T-iROBO UW cost?
Taisei Corporation has not publicly announced pricing for the T-iROBO UW. You can enquire through RobotAIGeek for current pricing.
What is the T-iROBO UW used for?
The T-iROBO UW is designed for construction. It is used in construction settings.
When was the T-iROBO UW released?
The T-iROBO UW was released in 2014.
COMPARE WITH SIMILAR ROBOTS
See how this robot stacks up against its closest alternatives
- T-iROBO UW vs Sentinus
- T-iROBO UW vs Sludge Cleaning Robot
- T-iROBO UW vs BWR Torus Inspection ROV
- T-iROBO UW vs Cavity Decontamination ROV
- T-iROBO UW vs SPECTRA







