DESCRIPTION
MogLifter is an Industrial-Robot from Taisei Corporation. It is built for Construction, Heavy-Load-Transportation, Material-Handling. Key figures: 346 kg, 1000 kg payload, released 2025.
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series. Earlier pallet and forklift robots needed wide routes and repeated turns to move long items such as lightweight steel framing; MogLifter, only 180 mm high (230 mm when lifting), drives under the trolley and lifts it. Its spherical-wheel drive lets it move in any direction through 360 degrees, so it can travel sideways along the short side of a long load and pick the best direction for the route. Its battery load can be reduced to keep it low enough to pass under trolleys or increased for longer running. LiDAR helps it avoid obstacles and a tape switch stops it on contact. It carries up to 1,000 kg at 50 m/min, hands loads over to the T-DriveX forklift robot and is operated remotely from a tablet through a general material-handling system. Taisei is continuing trial operation on sites.
FEATURES
- Slips under material trolleys and lifts them
- Height 180 mm, 230 mm when lifting
- Omnidirectional spherical-wheel drive
- Rated load 1,000 kg
- travel speed 50 m/min
- Adjustable battery load (low profile or long runtime)
- LiDAR obstacle avoidance and contact tape switch
- Works with T-DriveX forklift robot for hand-overs
- Tablet operation via a material-handling application
TECHNICAL SPECIFICATIONS
Verified| Physical | |
| Weight | 346 kg |
|---|---|
| Dimensions | L 1.52 m × W 795 mm × H 180 mm |
| Payload | 1000 kg |
| Mobility | |
| Movement Type | Wheeled |
| Speed | 2.99 km/h |
| Environment | Typical floors of high-rise office buildings under construction |
| Sensing & Compute | |
| Sensors | LiDAR, contact tape switch |
ROBOT FORUMS
Loading forums...
TECHNICAL SPECIFICATIONS
Verified| Physical | |
| Weight | 346 kg |
|---|---|
| Dimensions | L 1.52 m × W 795 mm × H 180 mm |
| Payload | 1000 kg |
| Mobility | |
| Movement Type | Wheeled |
| Speed | 2.99 km/h |
| Environment | Typical floors of high-rise office buildings under construction |
| Sensing & Compute | |
| Sensors | LiDAR, contact tape switch |
Images


Image Contributions
Videos
ROBOT FORUMS
Loading forums...
RATINGS
FREQUENTLY ASKED QUESTIONS
What is the MogLifter?
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series.
Who makes the MogLifter?
The MogLifter is made by Taisei Corporation, a robotics company based in Japan.
How much does the MogLifter cost?
Taisei Corporation has not publicly announced pricing for the MogLifter. You can enquire through RobotAIGeek for current pricing.
What is the MogLifter used for?
The MogLifter is designed for construction, heavy-load-transportation, material-handling, and transport. It is used in construction settings.
What is the payload capacity of the MogLifter?
The MogLifter has a payload capacity of 1,000 kg.
How much does the MogLifter weigh?
The MogLifter weighs 346 kg.
How fast is the MogLifter?
The MogLifter can move at speeds of up to 2.99 km/h.
When was the MogLifter released?
The MogLifter was announced in 2025 and is not yet generally available.
COMPARE WITH SIMILAR ROBOTS
See how this robot stacks up against its closest alternatives
- MogLifter vs iSAGEBOT Forklift Robot
- MogLifter vs VEENY Turret Truck AGV/AMR
- MogLifter vs REACHY Reach Forklift AGV/AMR
- MogLifter vs LOWY CB Counter Balanced Stacker AGV/AMR
- MogLifter vs LOWY HD Heavy Duty Stacker AGV/AMR






