説明
MogLifterはTaisei CorporationのIndustrial-Robotです。 建設、重量物搬送、マテリアルハンドリング向けに設計されています。 主な数値:346 kg、可搬質量 1000 kg、2025年発売。
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series. Earlier pallet and forklift robots needed wide routes and repeated turns to move long items such as lightweight steel framing; MogLifter, only 180 mm high (230 mm when lifting), drives under the trolley and lifts it. Its spherical-wheel drive lets it move in any direction through 360 degrees, so it can travel sideways along the short side of a long load and pick the best direction for the route. Its battery load can be reduced to keep it low enough to pass under trolleys or increased for longer running. LiDAR helps it avoid obstacles and a tape switch stops it on contact. It carries up to 1,000 kg at 50 m/min, hands loads over to the T-DriveX forklift robot and is operated remotely from a tablet through a general material-handling system. Taisei is continuing trial operation on sites.
特長
- Slips under material trolleys and lifts them
- Height 180 mm, 230 mm when lifting
- Omnidirectional spherical-wheel drive
- Rated load 1,000 kg
- travel speed 50 m/min
- Adjustable battery load (low profile or long runtime)
- LiDAR obstacle avoidance and contact tape switch
- Works with T-DriveX forklift robot for hand-overs
- Tablet operation via a material-handling application
技術仕様
検証済み| 本体 | |
| 重量 | 346 kg |
|---|---|
| 寸法 | L 1.52 m × W 795 mm × H 180 mm |
| 可搬重量 | 1000 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 2.99 km/h |
| 使用環境 | Typical floors of high-rise office buildings under construction |
| センシング・演算 | |
| センサー | LiDAR, contact tape switch |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 346 kg |
|---|---|
| 寸法 | L 1.52 m × W 795 mm × H 180 mm |
| 可搬重量 | 1000 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 2.99 km/h |
| 使用環境 | Typical floors of high-rise office buildings under construction |
| センシング・演算 | |
| センサー | LiDAR, contact tape switch |
画像


投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the MogLifter?
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series.
Who makes the MogLifter?
The MogLifter is made by Taisei Corporation, a robotics company based in Japan.
How much does the MogLifter cost?
Taisei Corporation has not publicly announced pricing for the MogLifter. You can enquire through RobotAIGeek for current pricing.
What is the MogLifter used for?
The MogLifter is designed for 建設, 重量物搬送, マテリアルハンドリング, and 搬送. It is used in 建設 settings.
What is the payload capacity of the MogLifter?
The MogLifter has a payload capacity of 1,000 kg.
How much does the MogLifter weigh?
The MogLifter weighs 346 kg.
How fast is the MogLifter?
The MogLifter can move at speeds of up to 2.99 km/h.
When was the MogLifter released?
The MogLifter was announced in 2025 and is not yet generally available.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- MogLifter vs iSAGEBOT Forklift Robot
- MogLifter vs VEENY Turret Truck AGV/AMR
- MogLifter vs REACHY Reach Forklift AGV/AMR
- MogLifter vs LOWY CB Counter Balanced Stacker AGV/AMR
- MogLifter vs LOWY HD Heavy Duty Stacker AGV/AMR






