描述
MogLifter是Taisei Corporation的Industrial-Robot。 面向建築、重型運輸、物料搬運設計。 關鍵數據:346 kg、負載 1000 kg、2025 年發布。
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series. Earlier pallet and forklift robots needed wide routes and repeated turns to move long items such as lightweight steel framing; MogLifter, only 180 mm high (230 mm when lifting), drives under the trolley and lifts it. Its spherical-wheel drive lets it move in any direction through 360 degrees, so it can travel sideways along the short side of a long load and pick the best direction for the route. Its battery load can be reduced to keep it low enough to pass under trolleys or increased for longer running. LiDAR helps it avoid obstacles and a tape switch stops it on contact. It carries up to 1,000 kg at 50 m/min, hands loads over to the T-DriveX forklift robot and is operated remotely from a tablet through a general material-handling system. Taisei is continuing trial operation on sites.
功能特色
- Slips under material trolleys and lifts them
- Height 180 mm, 230 mm when lifting
- Omnidirectional spherical-wheel drive
- Rated load 1,000 kg
- travel speed 50 m/min
- Adjustable battery load (low profile or long runtime)
- LiDAR obstacle avoidance and contact tape switch
- Works with T-DriveX forklift robot for hand-overs
- Tablet operation via a material-handling application
技術規格
已驗證| 物理參數 | |
| 重量 | 346 kg |
|---|---|
| 外形尺寸 | L 1.52 m × W 795 mm × H 180 mm |
| 負載 | 1000 kg |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 2.99 km/h |
| 作業環境 | Typical floors of high-rise office buildings under construction |
| 感知與計算 | |
| 感測器 | LiDAR, contact tape switch |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 346 kg |
|---|---|
| 外形尺寸 | L 1.52 m × W 795 mm × H 180 mm |
| 負載 | 1000 kg |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 2.99 km/h |
| 作業環境 | Typical floors of high-rise office buildings under construction |
| 感知與計算 | |
| 感測器 | LiDAR, contact tape switch |
圖片


圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the MogLifter?
MogLifter (model TA-MC1000) is an ultra-low autonomous mobile robot that slips under trolleys loaded with construction materials and carries them, developed in 2025 by Taisei Corporation with Rapyuta Robotics and Takumi as the third model of Taisei's T-DriveX autonomous material-transport series.
Who makes the MogLifter?
The MogLifter is made by Taisei Corporation, a robotics company based in Japan.
How much does the MogLifter cost?
Taisei Corporation has not publicly announced pricing for the MogLifter. You can enquire through RobotAIGeek for current pricing.
What is the MogLifter used for?
The MogLifter is designed for 建築, 重型運輸, 物料搬運, and 運輸. It is used in 建築 settings.
What is the payload capacity of the MogLifter?
The MogLifter has a payload capacity of 1,000 kg.
How much does the MogLifter weigh?
The MogLifter weighs 346 kg.
How fast is the MogLifter?
The MogLifter can move at speeds of up to 2.99 km/h.
When was the MogLifter released?
The MogLifter was announced in 2025 and is not yet generally available.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- MogLifter vs iSAGEBOT Forklift Robot
- MogLifter vs VEENY Turret Truck AGV/AMR
- MogLifter vs REACHY Reach Forklift AGV/AMR
- MogLifter vs LOWY CB Counter Balanced Stacker AGV/AMR
- MogLifter vs LOWY HD Heavy Duty Stacker AGV/AMR






