ExoHeaver Enforcer

DESCRIPTION

ExoHeaver Enforcer is an Industrial-Robot from Exomed. It is built for Heavy-Lifting, Lifting, Material-Handling. Key figures: 28 kg, 60 kg payload.

The ExoHeaver Enforcer is Exomed's active industrial exoskeleton for relieving the musculoskeletal system when workers lift, carry and hold loads at heights from floor level to 1.5 m. A full-body anthropomorphic frame with gravity compensators, bearing joints and an anthropometric vest transfers the load to the ground while leaving the wearer's natural mobility largely free; it also supports the operator when sitting and has a protective knee rest for work in awkward positions. Its load-lifting module is an electromechanical winch with an intelligent control system that raises loads of up to 60 kg to a height of up to 1.5 m at up to 0.25 m/s, operated from a handheld remote. It uses explosion-proof electric motors of 100 to 400 W with soft start, runs on a 16.8 V DC battery of 12 or 16 Ah, and adjusts in length and width to the wearer's height and chest size (clothing sizes 48 to 56), taking up to 3 minutes to put on. An on-board computer tracks and transmits gas contamination, air temperature, light level, the user's work mode and other parameters to the network, and options include weight, tilt, gas and environment sensors, an HD camera, a 450-lumen LED light, a 7-inch tablet and fire- and oil-resistant vests. The maker shows it in use at Gazprom Neft and Metalloinvest sites.

FEATURES