★尚未評分

ExoHeaver Enforcer

Industrial-RobotRussiaRussia已發布
ExoHeaver Enforcer
比較
來源:
價格:
尚未公布
型號:
ExoHeaver Enforcer active industrial exoskeleton

描述

ExoHeaver Enforcer是Exomed的Industrial-Robot。 面向重物搬運、舉重、物料搬運設計。 關鍵數據:28 kg、負載 60 kg。

The ExoHeaver Enforcer is Exomed's active industrial exoskeleton for relieving the musculoskeletal system when workers lift, carry and hold loads at heights from floor level to 1.5 m. A full-body anthropomorphic frame with gravity compensators, bearing joints and an anthropometric vest transfers the load to the ground while leaving the wearer's natural mobility largely free; it also supports the operator when sitting and has a protective knee rest for work in awkward positions. Its load-lifting module is an electromechanical winch with an intelligent control system that raises loads of up to 60 kg to a height of up to 1.5 m at up to 0.25 m/s, operated from a handheld remote. It uses explosion-proof electric motors of 100 to 400 W with soft start, runs on a 16.8 V DC battery of 12 or 16 Ah, and adjusts in length and width to the wearer's height and chest size (clothing sizes 48 to 56), taking up to 3 minutes to put on. An on-board computer tracks and transmits gas contamination, air temperature, light level, the user's work mode and other parameters to the network, and options include weight, tilt, gas and environment sensors, an HD camera, a 450-lumen LED light, a 7-inch tablet and fire- and oil-resistant vests. The maker shows it in use at Gazprom Neft and Metalloinvest sites.

功能特色

  • Active exoskeleton for lifting, carrying and holding loads from 0 to 1.5 m
  • Electromechanical winch lifts up to 60 kg to 1.5 m at up to 0.25 m/s, remote-controlled
  • Working load on the exoskeleton 50/60/80 kg by version
  • Explosion-proof 100-400 W motors with soft start (power 120/200/400 W)
  • 16.8 V DC battery, 12 or 16 Ah
  • Gravity compensators, bearing joints, anthropometric vest
  • Seated support and protective knee rest
  • Adjusts to vest sizes 50-56, pelvis 38-50 cm, thigh 30-42 cm, shin 48-62 cm
  • on in up to 3 min
  • On-board computer streams gas, temperature, light and work-mode data
  • Options: load-weight, tilt, temperature, light and gas (CO, CH4, CO2, C3H8, C4H10) sensors, compass, beacon, HD camera, 450 lm LED light, 7-inch tablet

技術規格

已驗證
物理參數
重量28 kg
外形尺寸L 400 mm × W 500 mm × H 1.8 m
負載60 kg
移動能力
移動類型其他
作業環境Industrial sites, plants, construction and oil and gas facilities, including explosive atmospheres (explosion-proof motors)
電源與續航
續航時間12 Ah or 16 Ah at 16.8 V
感知與計算
感測器Load weight sensor (optional), Tilt sensor (optional), Temperature sensor (optional), Light sensor (optional), Gas sensor CO/CH4/CO2/C3H8/C4H10 (optional), Compass (optional), HD camera (optional)
來源:製造商官網來源:第三方暫無來源來源狀態基於該機器人已登記的資料來源。

機器人論壇

正在載入論壇...

常見問題

What is the ExoHeaver Enforcer?

The ExoHeaver Enforcer is Exomed's active industrial exoskeleton for relieving the musculoskeletal system when workers lift, carry and hold loads at heights from floor level to 1.5 m.

Who makes the ExoHeaver Enforcer?

The ExoHeaver Enforcer is made by Exomed, a robotics company based in Russia.

How much does the ExoHeaver Enforcer cost?

Exomed has not publicly announced pricing for the ExoHeaver Enforcer. You can enquire through RobotAIGeek for current pricing.

What is the ExoHeaver Enforcer used for?

The ExoHeaver Enforcer is designed for 重物搬運, 舉重, and 物料搬運. It is used in 能源, 採礦, 建築, and 製造業 settings.

What is the payload capacity of the ExoHeaver Enforcer?

The ExoHeaver Enforcer has a payload capacity of 60 kg.

How much does the ExoHeaver Enforcer weigh?

The ExoHeaver Enforcer weighs 28 kg.

與同類機器人對比

看看這款機器人與最接近的同類產品相比表現如何

ExoHeaver Enforcer 的替代選擇 →

相關機器人

查看更多 >

訂閱獲取最新機器人資訊?