설명
ExoHeaver Enforcer은(는) Exomed의 Industrial-Robot입니다. 중량물 리프팅, 리프팅, 자재 취급 용도로 설계되었습니다. 주요 수치: 28 kg, 가반 하중 60 kg.
The ExoHeaver Enforcer is Exomed's active industrial exoskeleton for relieving the musculoskeletal system when workers lift, carry and hold loads at heights from floor level to 1.5 m. A full-body anthropomorphic frame with gravity compensators, bearing joints and an anthropometric vest transfers the load to the ground while leaving the wearer's natural mobility largely free; it also supports the operator when sitting and has a protective knee rest for work in awkward positions. Its load-lifting module is an electromechanical winch with an intelligent control system that raises loads of up to 60 kg to a height of up to 1.5 m at up to 0.25 m/s, operated from a handheld remote. It uses explosion-proof electric motors of 100 to 400 W with soft start, runs on a 16.8 V DC battery of 12 or 16 Ah, and adjusts in length and width to the wearer's height and chest size (clothing sizes 48 to 56), taking up to 3 minutes to put on. An on-board computer tracks and transmits gas contamination, air temperature, light level, the user's work mode and other parameters to the network, and options include weight, tilt, gas and environment sensors, an HD camera, a 450-lumen LED light, a 7-inch tablet and fire- and oil-resistant vests. The maker shows it in use at Gazprom Neft and Metalloinvest sites.
주요 기능
- Active exoskeleton for lifting, carrying and holding loads from 0 to 1.5 m
- Electromechanical winch lifts up to 60 kg to 1.5 m at up to 0.25 m/s, remote-controlled
- Working load on the exoskeleton 50/60/80 kg by version
- Explosion-proof 100-400 W motors with soft start (power 120/200/400 W)
- 16.8 V DC battery, 12 or 16 Ah
- Gravity compensators, bearing joints, anthropometric vest
- Seated support and protective knee rest
- Adjusts to vest sizes 50-56, pelvis 38-50 cm, thigh 30-42 cm, shin 48-62 cm
- on in up to 3 min
- On-board computer streams gas, temperature, light and work-mode data
- Options: load-weight, tilt, temperature, light and gas (CO, CH4, CO2, C3H8, C4H10) sensors, compass, beacon, HD camera, 450 lm LED light, 7-inch tablet
기술 사양
검증됨| 물리 사양 | |
| 무게 | 28 kg |
|---|---|
| 크기 | L 400 mm × W 500 mm × H 1.8 m |
| 가반하중 | 60 kg |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Industrial sites, plants, construction and oil and gas facilities, including explosive atmospheres (explosion-proof motors) |
| 전원 | |
| 배터리 지속 시간 | 12 Ah or 16 Ah at 16.8 V |
| 센싱 & 컴퓨팅 | |
| 센서 | Load weight sensor (optional), Tilt sensor (optional), Temperature sensor (optional), Light sensor (optional), Gas sensor CO/CH4/CO2/C3H8/C4H10 (optional), Compass (optional), HD camera (optional) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 28 kg |
|---|---|
| 크기 | L 400 mm × W 500 mm × H 1.8 m |
| 가반하중 | 60 kg |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Industrial sites, plants, construction and oil and gas facilities, including explosive atmospheres (explosion-proof motors) |
| 전원 | |
| 배터리 지속 시간 | 12 Ah or 16 Ah at 16.8 V |
| 센싱 & 컴퓨팅 | |
| 센서 | Load weight sensor (optional), Tilt sensor (optional), Temperature sensor (optional), Light sensor (optional), Gas sensor CO/CH4/CO2/C3H8/C4H10 (optional), Compass (optional), HD camera (optional) |
이미지






이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the ExoHeaver Enforcer?
The ExoHeaver Enforcer is Exomed's active industrial exoskeleton for relieving the musculoskeletal system when workers lift, carry and hold loads at heights from floor level to 1.5 m.
Who makes the ExoHeaver Enforcer?
The ExoHeaver Enforcer is made by Exomed, a robotics company based in Russia.
How much does the ExoHeaver Enforcer cost?
Exomed has not publicly announced pricing for the ExoHeaver Enforcer. You can enquire through RobotAIGeek for current pricing.
What is the ExoHeaver Enforcer used for?
The ExoHeaver Enforcer is designed for 중량물 리프팅, 리프팅, and 자재 취급. It is used in 에너지, 광업, 건설, and 제조 settings.
What is the payload capacity of the ExoHeaver Enforcer?
The ExoHeaver Enforcer has a payload capacity of 60 kg.
How much does the ExoHeaver Enforcer weigh?
The ExoHeaver Enforcer weighs 28 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- ExoHeaver Enforcer vs Agadexo Shoulder
- ExoHeaver Enforcer vs Agadexo Lowback
- ExoHeaver Enforcer vs IRB 4400/60-1.96
- ExoHeaver Enforcer vs IRB 4600-60/2.05
- ExoHeaver Enforcer vs IRB 4600-45/2.05










