설명
SZGH-I10은(는) SZGH Automation의 Collaborative-Robot입니다. 조립, 머신 텐딩, 자재 취급 용도로 설계되었습니다. 주요 수치: 38.5 kg, 가반 하중 10 kg, 도달 범위 1350 mm, 6 자유도.
The SZGH-I10 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation, built for heavier loads than the I3-I7 models. It carries 10 kg over a 1350 mm reach, weighs about 38.5 kg and draws around 500 W on average. All six joints rotate ±360°, it mounts on the floor, a ceiling or a wall, and SZGH says its collision detection stops the arm on contact so it can run without guardrails. SZGH lists it for 3C electronics, automotive, hardware and appliances, kitchen and sanitary ware, medical and health, research and education, catering, new retail, daily chemicals and logistics.
주요 기능
- Payload: 10 kg
- Reach: 1350 mm
- 6 axes, each with ±360° motion range
- Max joint speed: 178°/s (axes 1, 2, 4), 223°/s (axis 3), 237°/s (axes 5, 6)
- Average power: 500 W
- Weight: about 38.5 kg
- Collision detection: stops on contact, no guardrails needed (SZGH)
- Mounting: floor, ceiling or wall
- Ambient temperature: 0-50 °C
- Warranty: 2 years, with lifetime technical support
기술 사양
검증됨| 물리 사양 | |
| 무게 | 38.5 kg |
|---|---|
| 가반하중 | 10 kg |
| 도달거리 | 1.35 m |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ambient temperature 0-50 °C |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 38.5 kg |
|---|---|
| 가반하중 | 10 kg |
| 도달거리 | 1.35 m |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ambient temperature 0-50 °C |
이미지
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the SZGH-I10?
The SZGH-I10 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation, built for heavier loads than the I3-I7 models. It carries 10 kg over a 1350 mm reach, weighs about 38.5 kg and draws around 500 W on average.
Who makes the SZGH-I10?
The SZGH-I10 is made by SZGH Automation, a robotics company based in China.
How much does the SZGH-I10 cost?
SZGH Automation has not publicly announced pricing for the SZGH-I10. You can enquire through RobotAIGeek for current pricing.
What is the SZGH-I10 used for?
The SZGH-I10 is designed for 조립, 머신 텐딩, 자재 취급, and 픽앤플레이스. It is used in 자동차, 전자, 연구, and 교육 settings.
What is the payload capacity of the SZGH-I10?
The SZGH-I10 has a payload capacity of 10 kg and a reach of 1.35 m.
How much does the SZGH-I10 weigh?
The SZGH-I10 weighs 38.5 kg.
How many degrees of freedom does the SZGH-I10 have?
The SZGH-I10 has 6 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- SZGH-I10 vs Neuromeka Indy7 V3
- SZGH-I10 vs Neuromeka Indy12 V3
- SZGH-I10 vs Neuromeka NURI7c
- SZGH-I10 vs Neuromeka NURI12c
- SZGH-I10 vs Neuromeka NURI18c
