説明
SZGH-I10はSZGH AutomationのCollaborative-Robotです。 組立、マシンテンディング、マテリアルハンドリング向けに設計されています。 主な数値：38.5 kg、可搬質量 10 kg、リーチ 1350 mm、6 自由度。
The SZGH-I10 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation, built for heavier loads than the I3-I7 models. It carries 10 kg over a 1350 mm reach, weighs about 38.5 kg and draws around 500 W on average. All six joints rotate ±360°, it mounts on the floor, a ceiling or a wall, and SZGH says its collision detection stops the arm on contact so it can run without guardrails. SZGH lists it for 3C electronics, automotive, hardware and appliances, kitchen and sanitary ware, medical and health, research and education, catering, new retail, daily chemicals and logistics.
特長
- Payload: 10 kg
- Reach: 1350 mm
- 6 axes, each with ±360° motion range
- Max joint speed: 178°/s (axes 1, 2, 4), 223°/s (axis 3), 237°/s (axes 5, 6)
- Average power: 500 W
- Weight: about 38.5 kg
- Collision detection: stops on contact, no guardrails needed (SZGH)
- Mounting: floor, ceiling or wall
- Ambient temperature: 0-50 °C
- Warranty: 2 years, with lifetime technical support
技術仕様
検証済み| 本体 | |
| 重量 | 38.5 kg |
|---|---|
| 可搬重量 | 10 kg |
| リーチ | 1.35 m |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Ambient temperature 0-50 °C |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 38.5 kg |
|---|---|
| 可搬重量 | 10 kg |
| リーチ | 1.35 m |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Ambient temperature 0-50 °C |
画像
投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the SZGH-I10?
The SZGH-I10 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation, built for heavier loads than the I3-I7 models. It carries 10 kg over a 1350 mm reach, weighs about 38.5 kg and draws around 500 W on average.
Who makes the SZGH-I10?
The SZGH-I10 is made by SZGH Automation, a robotics company based in China.
How much does the SZGH-I10 cost?
SZGH Automation has not publicly announced pricing for the SZGH-I10. You can enquire through RobotAIGeek for current pricing.
What is the SZGH-I10 used for?
The SZGH-I10 is designed for 組立, マシンテンディング, マテリアルハンドリング, and ピック＆プレース. It is used in 自動車, エレクトロニクス, 研究, and 教育 settings.
What is the payload capacity of the SZGH-I10?
The SZGH-I10 has a payload capacity of 10 kg and a reach of 1.35 m.
How much does the SZGH-I10 weigh?
The SZGH-I10 weighs 38.5 kg.
How many degrees of freedom does the SZGH-I10 have?
The SZGH-I10 has 6 degrees of freedom.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- SZGH-I10 vs Neuromeka Indy7 V3
- SZGH-I10 vs Neuromeka Indy12 V3
- SZGH-I10 vs Neuromeka NURI7c
- SZGH-I10 vs Neuromeka NURI12c
- SZGH-I10 vs Neuromeka NURI18c
