설명
SZGH-I12은(는) SZGH Automation의 Collaborative-Robot입니다. 조립, 머신 텐딩, 자재 취급 용도로 설계되었습니다. 주요 수치: 40 kg, 가반 하중 12 kg, 도달 범위 1250 mm, 6 자유도.
The SZGH-I12 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation. It carries 12 kg over a 1250 mm reach with ±0.03 mm repeatability, weighs about 40 kg and draws around 500 W on average. All six joints rotate ±360°, it mounts on the floor, a ceiling or a wall, and SZGH says its collision detection stops the arm on contact so it can run without guardrails. SZGH lists it for 3C electronics, automotive, hardware and appliances, kitchen and sanitary ware, medical and health, research and education, catering, new retail, daily chemicals and logistics.
주요 기능
- Payload: 12 kg
- Reach: 1250 mm
- Repeatability: ±0.03 mm
- 6 axes, each with ±360° motion range
- Max joint speed: 178°/s (axes 1, 2, 4, 5, 6), 267°/s (axis 3)
- Average power: 500 W
- Weight: about 40 kg
- Collision detection: stops on contact, no guardrails needed (SZGH)
- Mounting: floor, ceiling or wall
- Ambient temperature: 0-50 °C
- Warranty: 2 years, with lifetime technical support
기술 사양
검증됨| 물리 사양 | |
| 무게 | 40 kg |
|---|---|
| 가반하중 | 12 kg |
| 도달거리 | 1.25 m |
| 반복 정밀도 | ±0.03 mm |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ambient temperature 0-50 °C |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 40 kg |
|---|---|
| 가반하중 | 12 kg |
| 도달거리 | 1.25 m |
| 반복 정밀도 | ±0.03 mm |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 6 |
| 작동 환경 | Ambient temperature 0-50 °C |
이미지
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the SZGH-I12?
The SZGH-I12 is a six-axis collaborative robot in SZGH's I-series from ShenZhen GuanHong Automation. It carries 12 kg over a 1250 mm reach with ±0.03 mm repeatability, weighs about 40 kg and draws around 500 W on average.
Who makes the SZGH-I12?
The SZGH-I12 is made by SZGH Automation, a robotics company based in China.
How much does the SZGH-I12 cost?
SZGH Automation has not publicly announced pricing for the SZGH-I12. You can enquire through RobotAIGeek for current pricing.
What is the SZGH-I12 used for?
The SZGH-I12 is designed for 조립, 머신 텐딩, 자재 취급, and 픽앤플레이스. It is used in 자동차, 전자, 연구, and 교육 settings.
What is the payload capacity of the SZGH-I12?
The SZGH-I12 has a payload capacity of 12 kg and a reach of 1.25 m.
How much does the SZGH-I12 weigh?
The SZGH-I12 weighs 40 kg.
How many degrees of freedom does the SZGH-I12 have?
The SZGH-I12 has 6 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- SZGH-I12 vs Neuromeka Indy7 V3
- SZGH-I12 vs Neuromeka Indy12 V3
- SZGH-I12 vs Neuromeka NURI7c
- SZGH-I12 vs Neuromeka NURI12c
- SZGH-I12 vs Neuromeka NURI18c
