説明
proliner navi3はMariner 3SのCleaning-Robotsです。 清掃向けに設計されています。 主な数値:43 kg、2018年発売。
The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use. Rotating brushes at the front and rear, with bristles of different lengths that reach into joints, plus four corner brushes for edges and corners, work together with over 20 kg of suction from an 850 l/min pump; it cleans an Olympic pool in about 2.5 hours. A high-tech sensor and patented drive programme let it clean lane by lane in H, N and X patterns or a defined sector, bypass obstacles such as water mushrooms without winding its cable, switch before diving pits and shut itself off when done. Six lamella cartridges give up to 6 m2 of filter area, and with large filters it rises to the surface on its own after cleaning. The 43 kg robot travels at 7.5-18 m/min on up to 50 m of floating cable and replaced the earlier navigator II and topliner models.
特長
- Olympic pools, water parks and pools from 400 m2
- cleans an Olympic pool in about 2.5 h
- Rotating front and rear brushes plus 4 corner brushes
- Robot 83 x 61 x 52 cm (W x L x H), 43 kg
- trolley with cable drum 62 kg
- Cleaning width up to 700 mm
- pump 850 l/min
- suction over 20 kg
- 6 lamella filter cartridges, up to 6 m2 filter area
- automatic re-surfacing (small-filter option without)
- High-tech sensor: H, N, X patterns, sector cleaning, obstacle bypass, auto shut-off
- Travelling speed 7.5-18 m/min
- climbs 28 deg
- 24 V DC robot, 0.5 kW supply
- floating cable 30/40/50 m
- Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
- keypad emergency operation
- Automatic switch-over on wall contact, after a set distance and on inclines
- start-delay timer
- up to 4 stored programmes
- Works in fresh, sea, thermal and brine water
- water temperature 10-40 deg C
- IP68
技術仕様
検証済み| 本体 | |
| 重量 | 43 kg |
|---|---|
| 寸法 | L 610 mm × W 830 mm × H 520 mm |
| 移動性能 | |
| 移動方式 | 水中型 |
| 速度 | 1.08 km/h |
| 使用環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| センシング・演算 | |
| センサー | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 接続性 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 43 kg |
|---|---|
| 寸法 | L 610 mm × W 830 mm × H 520 mm |
| 移動性能 | |
| 移動方式 | 水中型 |
| 速度 | 1.08 km/h |
| 使用環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| センシング・演算 | |
| センサー | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 接続性 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
画像





投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the proliner navi3?
The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use.
Who makes the proliner navi3?
The proliner navi3 is made by Mariner 3S, a robotics company based in Switzerland.
How much does the proliner navi3 cost?
Mariner 3S has not publicly announced pricing for the proliner navi3. You can enquire through RobotAIGeek for current pricing.
What is the proliner navi3 used for?
The proliner navi3 is designed for 清掃. It is used in その他, 清掃・施設管理, and ホテル settings.
How much does the proliner navi3 weigh?
The proliner navi3 weighs 43 kg.
How fast is the proliner navi3?
The proliner navi3 can move at speeds of up to 1.08 km/h.
When was the proliner navi3 released?
The proliner navi3 was released in 2018.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- proliner navi3 vs Underwater Anie
- proliner navi3 vs SAUSR Alpha
- proliner navi3 vs clubliner
- proliner navi3 vs proliner
- proliner navi3 vs proliner tube









