RobotAIGeek
★Noch nicht bewertet

proliner navi3

Cleaning-RobotsSwitzerlandSwitzerlandVeröffentlicht
proliner navi3
Vergleichen
Anwendungen:
Preis:
Nicht angekündigt
Modell:
Mariner 3S proliner navi3 pool cleaning robot with rotating brushes (Olympic pools)
Veröffentlicht:
2018

BESCHREIBUNG

proliner navi3 ist ein Cleaning-Robots von Mariner 3S. Er ist für Reinigung ausgelegt. Eckdaten: 43 kg, erschienen 2018.

The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use. Rotating brushes at the front and rear, with bristles of different lengths that reach into joints, plus four corner brushes for edges and corners, work together with over 20 kg of suction from an 850 l/min pump; it cleans an Olympic pool in about 2.5 hours. A high-tech sensor and patented drive programme let it clean lane by lane in H, N and X patterns or a defined sector, bypass obstacles such as water mushrooms without winding its cable, switch before diving pits and shut itself off when done. Six lamella cartridges give up to 6 m2 of filter area, and with large filters it rises to the surface on its own after cleaning. The 43 kg robot travels at 7.5-18 m/min on up to 50 m of floating cable and replaced the earlier navigator II and topliner models.

FUNKTIONEN

  • Olympic pools, water parks and pools from 400 m2
  • cleans an Olympic pool in about 2.5 h
  • Rotating front and rear brushes plus 4 corner brushes
  • Robot 83 x 61 x 52 cm (W x L x H), 43 kg
  • trolley with cable drum 62 kg
  • Cleaning width up to 700 mm
  • pump 850 l/min
  • suction over 20 kg
  • 6 lamella filter cartridges, up to 6 m2 filter area
  • automatic re-surfacing (small-filter option without)
  • High-tech sensor: H, N, X patterns, sector cleaning, obstacle bypass, auto shut-off
  • Travelling speed 7.5-18 m/min
  • climbs 28 deg
  • 24 V DC robot, 0.5 kW supply
  • floating cable 30/40/50 m
  • Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
  • keypad emergency operation
  • Automatic switch-over on wall contact, after a set distance and on inclines
  • start-delay timer
  • up to 4 stored programmes
  • Works in fresh, sea, thermal and brine water
  • water temperature 10-40 deg C
  • IP68

TECHNISCHE DATEN

Verifiziert
Physisch
Gewicht43 kg
AbmessungenL 610 mm × W 830 mm × H 520 mm
Mobilität
BewegungsartWasser
Geschwindigkeit1.08 km/h
EinsatzumgebungPublic and private swimming pools: indoor, outdoor, thermal and natural pools
Sensorik & Rechenleistung
Sensorendrive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection
KonnektivitätRadio remote control (869/433 MHz); Bluetooth app on plus / sensor models
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

HÄUFIG GESTELLTE FRAGEN

What is the proliner navi3?

The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use.

Who makes the proliner navi3?

The proliner navi3 is made by Mariner 3S, a robotics company based in Switzerland.

How much does the proliner navi3 cost?

Mariner 3S has not publicly announced pricing for the proliner navi3. You can enquire through RobotAIGeek for current pricing.

What is the proliner navi3 used for?

The proliner navi3 is designed for reinigung. It is used in sonstige, reinigung & gebäudemanagement, and hotellerie settings.

How much does the proliner navi3 weigh?

The proliner navi3 weighs 43 kg.

How fast is the proliner navi3?

The proliner navi3 can move at speeds of up to 1.08 km/h.

When was the proliner navi3 released?

The proliner navi3 was released in 2018.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu proliner navi3 →

ÄHNLICHE ROBOTER

MEHR ANZEIGEN >

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?