描述
proliner navi3是Mariner 3S的Cleaning-Robots。 面向清洁设计。 关键数据:43 kg、2018 年发布。
The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use. Rotating brushes at the front and rear, with bristles of different lengths that reach into joints, plus four corner brushes for edges and corners, work together with over 20 kg of suction from an 850 l/min pump; it cleans an Olympic pool in about 2.5 hours. A high-tech sensor and patented drive programme let it clean lane by lane in H, N and X patterns or a defined sector, bypass obstacles such as water mushrooms without winding its cable, switch before diving pits and shut itself off when done. Six lamella cartridges give up to 6 m2 of filter area, and with large filters it rises to the surface on its own after cleaning. The 43 kg robot travels at 7.5-18 m/min on up to 50 m of floating cable and replaced the earlier navigator II and topliner models.
功能特点
- Olympic pools, water parks and pools from 400 m2
- cleans an Olympic pool in about 2.5 h
- Rotating front and rear brushes plus 4 corner brushes
- Robot 83 x 61 x 52 cm (W x L x H), 43 kg
- trolley with cable drum 62 kg
- Cleaning width up to 700 mm
- pump 850 l/min
- suction over 20 kg
- 6 lamella filter cartridges, up to 6 m2 filter area
- automatic re-surfacing (small-filter option without)
- High-tech sensor: H, N, X patterns, sector cleaning, obstacle bypass, auto shut-off
- Travelling speed 7.5-18 m/min
- climbs 28 deg
- 24 V DC robot, 0.5 kW supply
- floating cable 30/40/50 m
- Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
- keypad emergency operation
- Automatic switch-over on wall contact, after a set distance and on inclines
- start-delay timer
- up to 4 stored programmes
- Works in fresh, sea, thermal and brine water
- water temperature 10-40 deg C
- IP68
技术规格
已验证| 物理参数 | |
| 重量 | 43 kg |
|---|---|
| 外形尺寸 | L 610 mm × W 830 mm × H 520 mm |
| 移动能力 | |
| 运动类型 | 水生 |
| 速度 | 1.08 km/h |
| 作业环境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知与计算 | |
| 传感器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 连接方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
机器人论坛
正在加载论坛...
技术规格
已验证| 物理参数 | |
| 重量 | 43 kg |
|---|---|
| 外形尺寸 | L 610 mm × W 830 mm × H 520 mm |
| 移动能力 | |
| 运动类型 | 水生 |
| 速度 | 1.08 km/h |
| 作业环境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知与计算 | |
| 传感器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 连接方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
图片





图片贡献
视频
机器人论坛
正在加载论坛...
评分
常见问题
What is the proliner navi3?
The proliner navi3 is Mariner 3S's top pool-cleaning robot for Olympic pools, adventure parks and pools from 400 m2, built for hard daily use.
Who makes the proliner navi3?
The proliner navi3 is made by Mariner 3S, a robotics company based in Switzerland.
How much does the proliner navi3 cost?
Mariner 3S has not publicly announced pricing for the proliner navi3. You can enquire through RobotAIGeek for current pricing.
What is the proliner navi3 used for?
The proliner navi3 is designed for 清洁. It is used in 其他, 清洁, and 酒店 settings.
How much does the proliner navi3 weigh?
The proliner navi3 weighs 43 kg.
How fast is the proliner navi3?
The proliner navi3 can move at speeds of up to 1.08 km/h.
When was the proliner navi3 released?
The proliner navi3 was released in 2018.
与同类机器人对比
看看这款机器人与最接近的同类产品相比表现如何
- proliner navi3 vs Underwater Anie
- proliner navi3 vs SAUSR Alpha
- proliner navi3 vs clubliner
- proliner navi3 vs proliner
- proliner navi3 vs proliner tube









