RobotAIGeek
★評価はまだありません

proliner natur

Cleaning-RobotsSwitzerlandSwitzerlandリリース済み
proliner natur
比較
情報源:
用途:
価格:
未発表
モデル:
Mariner 3S proliner natur pool cleaning robot with high-pressure unit for natural pools
発売:
2019

説明

proliner naturはMariner 3SのCleaning-Robotsです。 清掃向けに設計されています。 主な数値:38 kg、2019年発売。

The proliner natur is Mariner 3S's robot for natural and bio pools, where the lack of chemical treatment lets a stubborn biofilm - the breeding ground for algae - cling to the floor. It combines a floor-cleaning robot with a 250 bar high-pressure unit: an integrated rotor loosens the biofilm, and the robot sucks it into its six-cartridge filter box, so dirt is removed from the pool rather than just stirred up. The water is circulated in a closed loop, with the high-pressure water drawn from the pool itself, so no fresh water is needed. The 38 kg robot has a basic sensor for lane-by-lane H, N and X cleaning, flap rollers at the front and power rollers at the rear, an 850 l/min pump, a cleaning width up to 700 mm and automatic surfacing with large filters; the high-pressure module (13 l/min, 7.5 kW at 400 V) rides on its own trolley with a 25 m floating hose, and the robot can also run without it.

特長

  • Integrated high-pressure rotor
  • high-pressure unit 250 bar, 13 l/min on separate trolley (400 V, 7.5 kW)
  • Closed water circuit: high-pressure water drawn from the pool
  • Robot 78 x 60 x 37 cm (W x L x H), 38 kg
  • robot trolley with cable 62 kg
  • 6 lamella filter cartridges, up to 6 m2
  • pump 850 l/min
  • cleaning width up to 700 mm
  • Basic sensor: H, N, X patterns
  • flap rollers front, power rollers rear
  • automatic surfacing option
  • Travelling speed 7.5-18 m/min
  • water depth 20-30 cm to 10 m
  • floating cable 30/40/50 m
  • Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
  • keypad emergency operation
  • Automatic switch-over on wall contact, after a set distance and on inclines
  • start-delay timer
  • up to 4 stored programmes
  • Works in fresh, sea, thermal and brine water
  • water temperature 10-40 deg C
  • IP68

技術仕様

検証済み
本体
重量38 kg
寸法L 600 mm × W 780 mm × H 370 mm
移動性能
移動方式水中型
速度1.08 km/h
使用環境Public and private swimming pools: indoor, outdoor, thermal and natural pools
センシング・演算
センサーdrive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection
接続性Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the proliner natur?

The proliner natur is Mariner 3S's robot for natural and bio pools, where the lack of chemical treatment lets a stubborn biofilm - the breeding ground for algae - cling to the floor.

Who makes the proliner natur?

The proliner natur is made by Mariner 3S, a robotics company based in Switzerland.

How much does the proliner natur cost?

Mariner 3S has not publicly announced pricing for the proliner natur. You can enquire through RobotAIGeek for current pricing.

What is the proliner natur used for?

The proliner natur is designed for 清掃. It is used in その他, 清掃・施設管理, and ホテル settings.

How much does the proliner natur weigh?

The proliner natur weighs 38 kg.

How fast is the proliner natur?

The proliner natur can move at speeds of up to 1.08 km/h.

When was the proliner natur released?

The proliner natur was released in 2019.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

proliner natur の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?