描述
proliner natur是Mariner 3S的Cleaning-Robots。 面向清潔設計。 關鍵數據:38 kg、2019 年發布。
The proliner natur is Mariner 3S's robot for natural and bio pools, where the lack of chemical treatment lets a stubborn biofilm - the breeding ground for algae - cling to the floor. It combines a floor-cleaning robot with a 250 bar high-pressure unit: an integrated rotor loosens the biofilm, and the robot sucks it into its six-cartridge filter box, so dirt is removed from the pool rather than just stirred up. The water is circulated in a closed loop, with the high-pressure water drawn from the pool itself, so no fresh water is needed. The 38 kg robot has a basic sensor for lane-by-lane H, N and X cleaning, flap rollers at the front and power rollers at the rear, an 850 l/min pump, a cleaning width up to 700 mm and automatic surfacing with large filters; the high-pressure module (13 l/min, 7.5 kW at 400 V) rides on its own trolley with a 25 m floating hose, and the robot can also run without it.
功能特色
- Integrated high-pressure rotor
- high-pressure unit 250 bar, 13 l/min on separate trolley (400 V, 7.5 kW)
- Closed water circuit: high-pressure water drawn from the pool
- Robot 78 x 60 x 37 cm (W x L x H), 38 kg
- robot trolley with cable 62 kg
- 6 lamella filter cartridges, up to 6 m2
- pump 850 l/min
- cleaning width up to 700 mm
- Basic sensor: H, N, X patterns
- flap rollers front, power rollers rear
- automatic surfacing option
- Travelling speed 7.5-18 m/min
- water depth 20-30 cm to 10 m
- floating cable 30/40/50 m
- Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
- keypad emergency operation
- Automatic switch-over on wall contact, after a set distance and on inclines
- start-delay timer
- up to 4 stored programmes
- Works in fresh, sea, thermal and brine water
- water temperature 10-40 deg C
- IP68
技術規格
已驗證| 物理參數 | |
| 重量 | 38 kg |
|---|---|
| 外形尺寸 | L 600 mm × W 780 mm × H 370 mm |
| 移動能力 | |
| 移動類型 | 水生 |
| 速度 | 1.08 km/h |
| 作業環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知與計算 | |
| 感測器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 連線方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 38 kg |
|---|---|
| 外形尺寸 | L 600 mm × W 780 mm × H 370 mm |
| 移動能力 | |
| 移動類型 | 水生 |
| 速度 | 1.08 km/h |
| 作業環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知與計算 | |
| 感測器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 連線方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
圖片



圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the proliner natur?
The proliner natur is Mariner 3S's robot for natural and bio pools, where the lack of chemical treatment lets a stubborn biofilm - the breeding ground for algae - cling to the floor.
Who makes the proliner natur?
The proliner natur is made by Mariner 3S, a robotics company based in Switzerland.
How much does the proliner natur cost?
Mariner 3S has not publicly announced pricing for the proliner natur. You can enquire through RobotAIGeek for current pricing.
What is the proliner natur used for?
The proliner natur is designed for 清潔. It is used in 其他, 清潔, and 飯店 settings.
How much does the proliner natur weigh?
The proliner natur weighs 38 kg.
How fast is the proliner natur?
The proliner natur can move at speeds of up to 1.08 km/h.
When was the proliner natur released?
The proliner natur was released in 2019.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- proliner natur vs Underwater Anie
- proliner natur vs SAUSR Alpha
- proliner natur vs clubliner
- proliner natur vs proliner
- proliner natur vs proliner navi3







