描述
proliner是Mariner 3S的Cleaning-Robots。 面向清潔設計。 關鍵數據:28 kg、2017 年發布。
The proliner is Mariner 3S's pool-cleaning robot for pools longer than 25 m and for thermal spas. It combines strong suction - over 15 kg of negative pressure from an 850 l/min pump - with a large six-cartridge filter box, cleaning tracks up to 700 mm wide and following edges and corners, and aims to clean the whole pool in one cycle. Sensors help it detect the pool's features: it recognises obstacles, switches before leaving the water in beach-entry pools and can change direction before diving pits. The 28 kg robot climbs 28-degree slopes and travels at 7.5-18 m/min on a floating cable of up to 50 m, carried on a trolley with cable drum. The proliner plus adds the basic sensor for H, N and X lane patterns, Bluetooth for the app and a display remote, while the proliner runs pattern X; a large-filter option makes the robot self-surfacing.
功能特色
- Pools over 25 m long and thermal spas
- minimum water depth 20-30 cm, maximum 10 m
- Robot 55 x 60 x 37 cm (W x L x H), 28 kg
- trolley with cable drum 49 kg
- Cleaning width up to 700 mm
- pump 850 l/min
- suction over 15 kg
- 6 lamella filter cartridges (50/100/130 um)
- optional large filters with self-surfacing
- Travelling speed 7.5-18 m/min
- climbs inclines up to 28 deg
- Power 110-240 V AC, 0.5 kW
- robot runs on 24 V DC
- floating cable 30/40/50 m
- proliner: drive pattern X
- proliner plus: basic sensor, patterns H/N/X, obstacle bypass, section cleaning, Bluetooth, display remote
- Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
- keypad emergency operation
- Automatic switch-over on wall contact, after a set distance and on inclines
- start-delay timer
- up to 4 stored programmes
- Works in fresh, sea, thermal and brine water
- water temperature 10-40 deg C
- IP68
技術規格
已驗證| 物理參數 | |
| 重量 | 28 kg |
|---|---|
| 外形尺寸 | L 600 mm × W 550 mm × H 370 mm |
| 移動能力 | |
| 移動類型 | 水生 |
| 速度 | 1.08 km/h |
| 作業環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知與計算 | |
| 感測器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 連線方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 28 kg |
|---|---|
| 外形尺寸 | L 600 mm × W 550 mm × H 370 mm |
| 移動能力 | |
| 移動類型 | 水生 |
| 速度 | 1.08 km/h |
| 作業環境 | Public and private swimming pools: indoor, outdoor, thermal and natural pools |
| 感知與計算 | |
| 感測器 | drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection |
| 連線方式 | Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models |
圖片





圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the proliner?
The proliner is Mariner 3S's pool-cleaning robot for pools longer than 25 m and for thermal spas. It combines strong suction - over 15 kg of negative pressure from an 850 l/min pump - with a large six-cartridge filter box, cleaning tracks up to 700 mm wide and following edges and corners, and aims to clean the whole po…
Who makes the proliner?
The proliner is made by Mariner 3S, a robotics company based in Switzerland.
How much does the proliner cost?
Mariner 3S has not publicly announced pricing for the proliner. You can enquire through RobotAIGeek for current pricing.
What is the proliner used for?
The proliner is designed for 清潔. It is used in 其他, 清潔, and 飯店 settings.
How much does the proliner weigh?
The proliner weighs 28 kg.
How fast is the proliner?
The proliner can move at speeds of up to 1.08 km/h.
When was the proliner released?
The proliner was released in 2017.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- proliner vs Underwater Anie
- proliner vs SAUSR Alpha
- proliner vs clubliner
- proliner vs proliner navi3
- proliner vs proliner tube









