★아직 평가 없음

proliner

Cleaning-RobotsSwitzerlandSwitzerland출시됨
proliner
비교
용도:
가격:
미공개
모델:
Mariner 3S proliner / proliner plus pool cleaning robot (pools over 25 m and spas)
출시:
2017

설명

proliner은(는) Mariner 3S의 Cleaning-Robots입니다. 청소 용도로 설계되었습니다. 주요 수치: 28 kg, 2017년 출시.

The proliner is Mariner 3S's pool-cleaning robot for pools longer than 25 m and for thermal spas. It combines strong suction - over 15 kg of negative pressure from an 850 l/min pump - with a large six-cartridge filter box, cleaning tracks up to 700 mm wide and following edges and corners, and aims to clean the whole pool in one cycle. Sensors help it detect the pool's features: it recognises obstacles, switches before leaving the water in beach-entry pools and can change direction before diving pits. The 28 kg robot climbs 28-degree slopes and travels at 7.5-18 m/min on a floating cable of up to 50 m, carried on a trolley with cable drum. The proliner plus adds the basic sensor for H, N and X lane patterns, Bluetooth for the app and a display remote, while the proliner runs pattern X; a large-filter option makes the robot self-surfacing.

주요 기능

  • Pools over 25 m long and thermal spas
  • minimum water depth 20-30 cm, maximum 10 m
  • Robot 55 x 60 x 37 cm (W x L x H), 28 kg
  • trolley with cable drum 49 kg
  • Cleaning width up to 700 mm
  • pump 850 l/min
  • suction over 15 kg
  • 6 lamella filter cartridges (50/100/130 um)
  • optional large filters with self-surfacing
  • Travelling speed 7.5-18 m/min
  • climbs inclines up to 28 deg
  • Power 110-240 V AC, 0.5 kW
  • robot runs on 24 V DC
  • floating cable 30/40/50 m
  • proliner: drive pattern X
  • proliner plus: basic sensor, patterns H/N/X, obstacle bypass, section cleaning, Bluetooth, display remote
  • Manual control by radio remote or Mariner 3S app: forward, back, turn, spin on the spot, 3 speeds
  • keypad emergency operation
  • Automatic switch-over on wall contact, after a set distance and on inclines
  • start-delay timer
  • up to 4 stored programmes
  • Works in fresh, sea, thermal and brine water
  • water temperature 10-40 deg C
  • IP68

기술 사양

검증됨
물리 사양
무게28 kg
크기L 600 mm × W 550 mm × H 370 mm
이동성
이동 방식수중형
속도1.08 km/h
작동 환경Public and private swimming pools: indoor, outdoor, thermal and natural pools
센싱 & 컴퓨팅
센서drive-pattern / obstacle sensor (basic or high-tech, model dependent), incline detection
연결성Radio remote control (869/433 MHz); Bluetooth app on plus / sensor models
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the proliner?

The proliner is Mariner 3S's pool-cleaning robot for pools longer than 25 m and for thermal spas. It combines strong suction - over 15 kg of negative pressure from an 850 l/min pump - with a large six-cartridge filter box, cleaning tracks up to 700 mm wide and following edges and corners, and aims to clean the whole po…

Who makes the proliner?

The proliner is made by Mariner 3S, a robotics company based in Switzerland.

How much does the proliner cost?

Mariner 3S has not publicly announced pricing for the proliner. You can enquire through RobotAIGeek for current pricing.

What is the proliner used for?

The proliner is designed for 청소. It is used in 기타, 청소·시설 관리, and 호텔 settings.

How much does the proliner weigh?

The proliner weighs 28 kg.

How fast is the proliner?

The proliner can move at speeds of up to 1.08 km/h.

When was the proliner released?

The proliner was released in 2017.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

proliner 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?