描述
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking. Range roughly follows: 17.5 km per battery, and two batteries are supplied rather than one, so a day on the trail does not end at a charger. Each pack is 72 Wh, below the airline cabin limit, and swaps in seconds. The AI MotionEngine and its dozen-plus sensors are shared with the rest of the range, reading the wearer's movement in three dimensions and adjusting power per stride. The frame folds to 2 kg, is IP54 rated and specified down to -20 degrees Celsius. It has since been discontinued in favour of the X Series S models.
功能特色
- 800 W of hip assistance
- 10 intelligent assistance modes
- 17.5 km of range per battery
- Two 72 Wh batteries included
- 2 kg ultra-light foldable design
- AI MotionEngine driving two hip motors
- Over a dozen sensors including IMUs, gyroscopes and barometers
- IP54 dust and water resistance
- Rated for cold operation down to -20 degrees Celsius
- Batteries under the airline carry-on limit
- Not a medical device - for users who can walk independently
技術規格
已驗證| 物理參數 | |
| 重量 | 2 kg |
|---|---|
| 移動能力 | |
| 移動類型 | 其他 |
| 操作能力 | 低 |
| 作業環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源與續航 | |
| 續航時間 | 72 Wh (5000 mAh) x2 |
| 感知與計算 | |
| 感測器 | IMU, Gyroscope, Accelerometer, Barometer |
| 連線方式 | Phone app control |
技術規格
已驗證| 物理參數 | |
| 重量 | 2 kg |
|---|---|
| 移動能力 | |
| 移動類型 | 其他 |
| 操作能力 | 低 |
| 作業環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源與續航 | |
| 續航時間 | 72 Wh (5000 mAh) x2 |
| 感知與計算 | |
| 感測器 | IMU, Gyroscope, Accelerometer, Barometer |
| 連線方式 | Phone app control |
圖片
圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the Hypershell X Pro?
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking.
Who makes the Hypershell X Pro?
The Hypershell X Pro is made by Hypershell, a robotics company based in China.
How much does the Hypershell X Pro cost?
The Hypershell X Pro is priced at around $899.
What is the Hypershell X Pro used for?
The Hypershell X Pro is designed for 協助 and 幫助. It is used in 消費者, 休閒旅遊, and 醫療保健 settings.
How much does the Hypershell X Pro weigh?
The Hypershell X Pro weighs 2 kg.
When was the Hypershell X Pro released?
The Hypershell X Pro was released in 2025.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- Hypershell X Pro vs Dnsys X1 Hip Exoskeleton
- Hypershell X Pro vs Dnsys Z1 Knee Exoskeleton
- Hypershell X Pro vs Ascentiz H Pro
- Hypershell X Pro vs Ascentiz H Ultra
- Hypershell X Pro vs Hypershell X Go