RobotAIGeek
★Noch nicht bewertet

Hypershell X Pro

Consumer-RobotChinaChinaEingestellt
Hypershell X Pro
Vergleichen
Anwendungen:
Preis:
Nicht angekündigt
Veröffentlicht:
2025

BESCHREIBUNG

The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking. Range roughly follows: 17.5 km per battery, and two batteries are supplied rather than one, so a day on the trail does not end at a charger. Each pack is 72 Wh, below the airline cabin limit, and swaps in seconds. The AI MotionEngine and its dozen-plus sensors are shared with the rest of the range, reading the wearer's movement in three dimensions and adjusting power per stride. The frame folds to 2 kg, is IP54 rated and specified down to -20 degrees Celsius. It has since been discontinued in favour of the X Series S models.

FUNKTIONEN

  • 800 W of hip assistance
  • 10 intelligent assistance modes
  • 17.5 km of range per battery
  • Two 72 Wh batteries included
  • 2 kg ultra-light foldable design
  • AI MotionEngine driving two hip motors
  • Over a dozen sensors including IMUs, gyroscopes and barometers
  • IP54 dust and water resistance
  • Rated for cold operation down to -20 degrees Celsius
  • Batteries under the airline carry-on limit
  • Not a medical device - for users who can walk independently

TECHNISCHE DATEN

Verifiziert
Physisch
Gewicht2 kg
Mobilität
BewegungsartSonstige
ManipulationNiedrig
EinsatzumgebungWorn on the body outdoors and indoors - trails, slopes, stairs and everyday walking.
Energie
Akkulaufzeit72 Wh (5000 mAh) x2
Sensorik & Rechenleistung
SensorenIMU, Gyroscope, Accelerometer, Barometer
KonnektivitätPhone app control
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

HÄUFIG GESTELLTE FRAGEN

What is the Hypershell X Pro?

The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking.

Who makes the Hypershell X Pro?

The Hypershell X Pro is made by Hypershell, a robotics company based in China.

How much does the Hypershell X Pro cost?

The Hypershell X Pro is priced at around $899.

What is the Hypershell X Pro used for?

The Hypershell X Pro is designed for assistenz and hilfe. It is used in verbraucher, freizeit & tourismus, and gesundheitswesen settings.

How much does the Hypershell X Pro weigh?

The Hypershell X Pro weighs 2 kg.

When was the Hypershell X Pro released?

The Hypershell X Pro was released in 2025.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu Hypershell X Pro →

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?