설명
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking. Range roughly follows: 17.5 km per battery, and two batteries are supplied rather than one, so a day on the trail does not end at a charger. Each pack is 72 Wh, below the airline cabin limit, and swaps in seconds. The AI MotionEngine and its dozen-plus sensors are shared with the rest of the range, reading the wearer's movement in three dimensions and adjusting power per stride. The frame folds to 2 kg, is IP54 rated and specified down to -20 degrees Celsius. It has since been discontinued in favour of the X Series S models.
주요 기능
- 800 W of hip assistance
- 10 intelligent assistance modes
- 17.5 km of range per battery
- Two 72 Wh batteries included
- 2 kg ultra-light foldable design
- AI MotionEngine driving two hip motors
- Over a dozen sensors including IMUs, gyroscopes and barometers
- IP54 dust and water resistance
- Rated for cold operation down to -20 degrees Celsius
- Batteries under the airline carry-on limit
- Not a medical device - for users who can walk independently
기술 사양
검증됨| 물리 사양 | |
| 무게 | 2 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 전원 | |
| 배터리 지속 시간 | 72 Wh (5000 mAh) x2 |
| 센싱 & 컴퓨팅 | |
| 센서 | IMU, Gyroscope, Accelerometer, Barometer |
| 연결성 | Phone app control |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 2 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 전원 | |
| 배터리 지속 시간 | 72 Wh (5000 mAh) x2 |
| 센싱 & 컴퓨팅 | |
| 센서 | IMU, Gyroscope, Accelerometer, Barometer |
| 연결성 | Phone app control |
이미지
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Hypershell X Pro?
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking.
Who makes the Hypershell X Pro?
The Hypershell X Pro is made by Hypershell, a robotics company based in China.
How much does the Hypershell X Pro cost?
The Hypershell X Pro is priced at around $899.
What is the Hypershell X Pro used for?
The Hypershell X Pro is designed for 보조 and 도우미. It is used in 소비자, 레저·관광, and 헬스케어 settings.
How much does the Hypershell X Pro weigh?
The Hypershell X Pro weighs 2 kg.
When was the Hypershell X Pro released?
The Hypershell X Pro was released in 2025.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Hypershell X Pro vs Dnsys X1 Hip Exoskeleton
- Hypershell X Pro vs Dnsys Z1 Knee Exoskeleton
- Hypershell X Pro vs Ascentiz H Pro
- Hypershell X Pro vs Ascentiz H Ultra
- Hypershell X Pro vs Hypershell X Go