説明
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking. Range roughly follows: 17.5 km per battery, and two batteries are supplied rather than one, so a day on the trail does not end at a charger. Each pack is 72 Wh, below the airline cabin limit, and swaps in seconds. The AI MotionEngine and its dozen-plus sensors are shared with the rest of the range, reading the wearer's movement in three dimensions and adjusting power per stride. The frame folds to 2 kg, is IP54 rated and specified down to -20 degrees Celsius. It has since been discontinued in favour of the X Series S models.
特長
- 800 W of hip assistance
- 10 intelligent assistance modes
- 17.5 km of range per battery
- Two 72 Wh batteries included
- 2 kg ultra-light foldable design
- AI MotionEngine driving two hip motors
- Over a dozen sensors including IMUs, gyroscopes and barometers
- IP54 dust and water resistance
- Rated for cold operation down to -20 degrees Celsius
- Batteries under the airline carry-on limit
- Not a medical device - for users who can walk independently
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 移動性能 | |
| 移動方式 | その他 |
| マニピュレーション | 低 |
| 使用環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源 | |
| バッテリー駆動時間 | 72 Wh (5000 mAh) x2 |
| センシング・演算 | |
| センサー | IMU, Gyroscope, Accelerometer, Barometer |
| 接続性 | Phone app control |
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 移動性能 | |
| 移動方式 | その他 |
| マニピュレーション | 低 |
| 使用環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源 | |
| バッテリー駆動時間 | 72 Wh (5000 mAh) x2 |
| センシング・演算 | |
| センサー | IMU, Gyroscope, Accelerometer, Barometer |
| 接続性 | Phone app control |
画像
投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Hypershell X Pro?
The Hypershell X Pro doubles the X Go's output to 800 W and widens the control range to ten intelligent modes, which is what makes it the choice for sustained climbing rather than level walking.
Who makes the Hypershell X Pro?
The Hypershell X Pro is made by Hypershell, a robotics company based in China.
How much does the Hypershell X Pro cost?
The Hypershell X Pro is priced at around $899.
What is the Hypershell X Pro used for?
The Hypershell X Pro is designed for アシスト and お手伝い. It is used in コンシューマー, レジャー・観光, and 医療 settings.
How much does the Hypershell X Pro weigh?
The Hypershell X Pro weighs 2 kg.
When was the Hypershell X Pro released?
The Hypershell X Pro was released in 2025.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Hypershell X Pro vs Dnsys X1 Hip Exoskeleton
- Hypershell X Pro vs Dnsys Z1 Knee Exoskeleton
- Hypershell X Pro vs Ascentiz H Pro
- Hypershell X Pro vs Ascentiz H Ultra
- Hypershell X Pro vs Hypershell X Go