★Not rated yet

Gridbots Magneto-TUBESCAN

Industrial-RobotIndiaIndiaReleased
Gridbots Magneto-TUBESCAN
Compare
Sources:
Industries:
Uses:
Data CollectionMappingInspectionScanningBoiler tube wall-thickness mapping during outages
Price:
Not announced
Model:
GB-MAGNETO-TUBESCAN

DESCRIPTION

Gridbots Magneto-TUBESCAN is an Industrial-Robot from Gridbots. It is built for Data Collection, Mapping, Inspection. Key figures: 20 kg.

Gridbots Magneto-TUBESCAN is a magnetic climbing robot from Gridbots that measures the wall thickness of power plant boiler waterwall tubes, up to 10 tubes in a single run, with an array of immersion ultrasonic probes. As it climbs, each probe records tube thickness continuously at 0.1 mm linear resolution and +/-0.1 mm accuracy, and the data is stitched in real time into a 3D thickness map of the boiler that marks healthy tubes, sections to monitor and critical thinning. Permanent-magnet adhesion of up to 500 N, twin 400 W PMSM drives, a wheel encoder and a 6-DOF IMU let it climb vertical and inclined waterwalls while knowing where every reading was taken. Ten channels in a single probe beam use water-column probe shoes on tubes of 38 to 76 mm outer diameter and measure 2 to 15 mm of steel at 5 to 10 MHz. Three FHD cameras with LED lighting stream video to a 12-inch touch-screen control unit that shows the A-scan of each probe, a running trace for all 10 tubes and the robot position, then generates a tube-by-tube report. The robot climbs at up to 20 mm/s, weighs 20 kg, draws about 100 W on average from single-phase AC or a battery pack over an umbilical of up to 250 m, and is rated IP54 for 5 to 65 C, with six TOF sensors, an impact sensor, two emergency stops and a safety-rope anchor.

FEATURES

  • Measures up to 10 waterwall tubes per run with a 10-channel immersion ultrasonic probe beam
  • Thickness 2-15 mm steel, +/-0.1 mm accuracy, 0.1 mm linear resolution
  • Self-aligning water-column probe shoes for 38-76 mm tube OD
  • adjustable pitch
  • Real-time 3D boiler thickness map and 2D unrolled waterwall map
  • OK/monitor/critical thresholds
  • Permanent-magnet adhesion up to 500 N
  • twin 400 W PMSM drives
  • Wheel encoder plus 6-DOF IMU position tracking
  • 3 FHD cameras with LED illumination
  • 12 inch touch-screen control unit
  • Up to 20 mm/s
  • umbilical up to 250 m
  • single-phase AC or battery pack
  • Trend overlay of previous outages
  • PDF and CSV report export
  • 6 TOF sensors, impact sensor, 2 E-stops, safety rope anchor

TECHNICAL SPECIFICATIONS

Verified
Physical
Weight20 kg
Mobility
Movement TypeWheeled
Speed0.07 km/h
EnvironmentPower plant boiler waterwalls; IP54, 5°C to 65°C
Sensing & Compute
Sensors10-channel immersion ultrasonic probe beam, 3 FHD cameras, 6-DOF IMU, wheel encoder, 6 TOF sensors, impact sensor
Manufacturer-sourcedThird-party sourcedUnsourcedSource status is based on this robot's listed sources.

ROBOT FORUMS

Loading forums...

FREQUENTLY ASKED QUESTIONS

What is the Gridbots Magneto-TUBESCAN?

Gridbots Magneto-TUBESCAN is a magnetic climbing robot from Gridbots that measures the wall thickness of power plant boiler waterwall tubes, up to 10 tubes in a single run, with an array of immersion ultrasonic probes.

Who makes the Gridbots Magneto-TUBESCAN?

The Gridbots Magneto-TUBESCAN is made by Gridbots, a robotics company based in India.

How much does the Gridbots Magneto-TUBESCAN cost?

Gridbots has not publicly announced pricing for the Gridbots Magneto-TUBESCAN. You can enquire through RobotAIGeek for current pricing.

What is the Gridbots Magneto-TUBESCAN used for?

The Gridbots Magneto-TUBESCAN is designed for data collection, mapping, inspection, and scanning. It is used in energy settings.

How much does the Gridbots Magneto-TUBESCAN weigh?

The Gridbots Magneto-TUBESCAN weighs 20 kg.

How fast is the Gridbots Magneto-TUBESCAN?

The Gridbots Magneto-TUBESCAN can move at speeds of up to 0.07 km/h.

COMPARE WITH SIMILAR ROBOTS

See how this robot stacks up against its closest alternatives

Alternatives to Gridbots Magneto-TUBESCAN →

RELATED ROBOTS

SEE MORE >

GET WEEKLY NEWS FOR THE NEWEST ROBOT UPDATES?