描述
Gridbots Magneto-TUBESCAN是Gridbots的Industrial-Robot。 面向数据收集、制图、检查设计。 关键数据:20 kg。
Gridbots Magneto-TUBESCAN is a magnetic climbing robot from Gridbots that measures the wall thickness of power plant boiler waterwall tubes, up to 10 tubes in a single run, with an array of immersion ultrasonic probes. As it climbs, each probe records tube thickness continuously at 0.1 mm linear resolution and +/-0.1 mm accuracy, and the data is stitched in real time into a 3D thickness map of the boiler that marks healthy tubes, sections to monitor and critical thinning. Permanent-magnet adhesion of up to 500 N, twin 400 W PMSM drives, a wheel encoder and a 6-DOF IMU let it climb vertical and inclined waterwalls while knowing where every reading was taken. Ten channels in a single probe beam use water-column probe shoes on tubes of 38 to 76 mm outer diameter and measure 2 to 15 mm of steel at 5 to 10 MHz. Three FHD cameras with LED lighting stream video to a 12-inch touch-screen control unit that shows the A-scan of each probe, a running trace for all 10 tubes and the robot position, then generates a tube-by-tube report. The robot climbs at up to 20 mm/s, weighs 20 kg, draws about 100 W on average from single-phase AC or a battery pack over an umbilical of up to 250 m, and is rated IP54 for 5 to 65 C, with six TOF sensors, an impact sensor, two emergency stops and a safety-rope anchor.
功能特点
- Measures up to 10 waterwall tubes per run with a 10-channel immersion ultrasonic probe beam
- Thickness 2-15 mm steel, +/-0.1 mm accuracy, 0.1 mm linear resolution
- Self-aligning water-column probe shoes for 38-76 mm tube OD
- adjustable pitch
- Real-time 3D boiler thickness map and 2D unrolled waterwall map
- OK/monitor/critical thresholds
- Permanent-magnet adhesion up to 500 N
- twin 400 W PMSM drives
- Wheel encoder plus 6-DOF IMU position tracking
- 3 FHD cameras with LED illumination
- 12 inch touch-screen control unit
- Up to 20 mm/s
- umbilical up to 250 m
- single-phase AC or battery pack
- Trend overlay of previous outages
- PDF and CSV report export
- 6 TOF sensors, impact sensor, 2 E-stops, safety rope anchor
技术规格
已验证| 物理参数 | |
| 重量 | 20 kg |
|---|---|
| 移动能力 | |
| 运动类型 | 带轮的 |
| 速度 | 0.07 km/h |
| 作业环境 | Power plant boiler waterwalls; IP54, 5°C to 65°C |
| 感知与计算 | |
| 传感器 | 10-channel immersion ultrasonic probe beam, 3 FHD cameras, 6-DOF IMU, wheel encoder, 6 TOF sensors, impact sensor |
机器人论坛
正在加载论坛...
技术规格
已验证| 物理参数 | |
| 重量 | 20 kg |
|---|---|
| 移动能力 | |
| 运动类型 | 带轮的 |
| 速度 | 0.07 km/h |
| 作业环境 | Power plant boiler waterwalls; IP54, 5°C to 65°C |
| 感知与计算 | |
| 传感器 | 10-channel immersion ultrasonic probe beam, 3 FHD cameras, 6-DOF IMU, wheel encoder, 6 TOF sensors, impact sensor |
图片

图片贡献
视频
机器人论坛
正在加载论坛...
评分
常见问题
What is the Gridbots Magneto-TUBESCAN?
Gridbots Magneto-TUBESCAN is a magnetic climbing robot from Gridbots that measures the wall thickness of power plant boiler waterwall tubes, up to 10 tubes in a single run, with an array of immersion ultrasonic probes.
Who makes the Gridbots Magneto-TUBESCAN?
The Gridbots Magneto-TUBESCAN is made by Gridbots, a robotics company based in India.
How much does the Gridbots Magneto-TUBESCAN cost?
Gridbots has not publicly announced pricing for the Gridbots Magneto-TUBESCAN. You can enquire through RobotAIGeek for current pricing.
What is the Gridbots Magneto-TUBESCAN used for?
The Gridbots Magneto-TUBESCAN is designed for 数据收集, 制图, 检查, and 扫描. It is used in 能源 settings.
How much does the Gridbots Magneto-TUBESCAN weigh?
The Gridbots Magneto-TUBESCAN weighs 20 kg.
How fast is the Gridbots Magneto-TUBESCAN?
The Gridbots Magneto-TUBESCAN can move at speeds of up to 0.07 km/h.
与同类机器人对比
看看这款机器人与最接近的同类产品相比表现如何
- Gridbots Magneto-TUBESCAN vs TRI Wind Turbine Blade Exterior Inspection Robot
- Gridbots Magneto-TUBESCAN vs TRI Wind Turbine Blade Interior Inspection Robot
- Gridbots Magneto-TUBESCAN vs CivDot Mini
- Gridbots Magneto-TUBESCAN vs AEON
- Gridbots Magneto-TUBESCAN vs Shihe Wind Turbine Tower Weld Inspection Robot





