★Not rated yet

Gridbots Magneto-HydroBLAST

Cleaning-RobotsIndiaIndiaReleased
Gridbots Magneto-HydroBLAST
Compare
Sources:
Uses:
CleaningCoatingPaintingUHP water-jet surface preparation (hydroblasting) of steel walls
Price:
Not announced
Model:
GB-HYDRO BLAST

DESCRIPTION

Gridbots Magneto-HydroBLAST is a Cleaning-Robots from Gridbots. It is built for Cleaning, Coating, Painting. Key figures: 30 kg, 50 kg payload.

Gridbots Magneto-HydroBLAST is a magnetic climbing robot from Gridbots that strips paint, coatings, rust and lacquer from steel surfaces with an ultra-high-pressure water jet. It works on the walls of chimneys, bridge structures and petroleum, acid and other storage tanks, which it can treat while they stay in service, and can also be used for painting and coating after surface preparation. Powerful rare-earth magnets hold the tracked robot to vertical and inclined steel, and live video from its cameras lets the operator judge the effect of the jet as it works. It needs only a portable power supply and a high-pressure water-jetting source sized to the job. Gridbots specifies a payload of up to 50 kg, a robot weight of 30 kg, a crawling speed of up to 10 mm/s with 0.1 mm encoder resolution and a 100 Hz 6-DOF IMU, a tether with Kevlar wire rope of up to 100 m, 24 V power at 1 kW peak, IP65 protection and operation from 5 to 65 C. Safety equipment lists six time-of-flight sensors, an impact sensor and two emergency stops.

FEATURES

  • Ultra-high-pressure water jetting for paint, coating, rust and lacquer removal
  • Rare-earth magnet adhesion on vertical and inclined steel
  • Works on tanks online, chimneys and bridge structures
  • Real-time video feed to judge jetting impact
  • Can also be used for painting and coating after surface preparation
  • Payload up to 50 kg
  • Crawling speed up to 10 mm/s
  • 0.1 mm encoder resolution
  • 100 Hz 6-DOF IMU
  • Tether with Kevlar wire rope, up to 100 m
  • Portable power supply, 24 V, 1 kW peak
  • 6 TOF sensors, impact sensor and 2 emergency stops

TECHNICAL SPECIFICATIONS

Verified
Physical
Weight30 kg
DimensionsL 871 mm × W 534 mm × H 340 mm
Payload50 kg
Mobility
Movement TypeOther
Speed0.04 km/h
EnvironmentVertical and inclined steel surfaces: tanks, chimneys, bridge structures; IP65, 5°C to 65°C
Sensing & Compute
Sensors2 down-facing cameras, 6-DOF IMU, wheel encoders, 6 TOF sensors, impact sensor
Manufacturer-sourcedThird-party sourcedUnsourcedSource status is based on this robot's listed sources.

ROBOT FORUMS

Loading forums...

FREQUENTLY ASKED QUESTIONS

What is the Gridbots Magneto-HydroBLAST?

Gridbots Magneto-HydroBLAST is a magnetic climbing robot from Gridbots that strips paint, coatings, rust and lacquer from steel surfaces with an ultra-high-pressure water jet.

Who makes the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST is made by Gridbots, a robotics company based in India.

How much does the Gridbots Magneto-HydroBLAST cost?

Gridbots has not publicly announced pricing for the Gridbots Magneto-HydroBLAST. You can enquire through RobotAIGeek for current pricing.

What is the Gridbots Magneto-HydroBLAST used for?

The Gridbots Magneto-HydroBLAST is designed for cleaning, coating, painting, and uhp water-jet surface preparation (hydroblasting) of steel walls. It is used in energy, construction, and manufacturing settings.

What is the payload capacity of the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST has a payload capacity of 50 kg.

How much does the Gridbots Magneto-HydroBLAST weigh?

The Gridbots Magneto-HydroBLAST weighs 30 kg.

How fast is the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST can move at speeds of up to 0.04 km/h.

COMPARE WITH SIMILAR ROBOTS

See how this robot stacks up against its closest alternatives

Alternatives to Gridbots Magneto-HydroBLAST →

RELATED ROBOTS

SEE MORE >

GET WEEKLY NEWS FOR THE NEWEST ROBOT UPDATES?