RobotAIGeek
★評価はまだありません

Gridbots Magneto-HydroBLAST

Cleaning-RobotsIndiaIndiaリリース済み
Gridbots Magneto-HydroBLAST
比較
情報源:
用途:
清掃コーティング塗装UHP water-jet surface preparation (hydroblasting) of steel walls
価格:
未発表
モデル:
GB-HYDRO BLAST

説明

Gridbots Magneto-HydroBLASTはGridbotsのCleaning-Robotsです。 清掃、コーティング、塗装向けに設計されています。 主な数値:30 kg、可搬質量 50 kg。

Gridbots Magneto-HydroBLAST is a magnetic climbing robot from Gridbots that strips paint, coatings, rust and lacquer from steel surfaces with an ultra-high-pressure water jet. It works on the walls of chimneys, bridge structures and petroleum, acid and other storage tanks, which it can treat while they stay in service, and can also be used for painting and coating after surface preparation. Powerful rare-earth magnets hold the tracked robot to vertical and inclined steel, and live video from its cameras lets the operator judge the effect of the jet as it works. It needs only a portable power supply and a high-pressure water-jetting source sized to the job. Gridbots specifies a payload of up to 50 kg, a robot weight of 30 kg, a crawling speed of up to 10 mm/s with 0.1 mm encoder resolution and a 100 Hz 6-DOF IMU, a tether with Kevlar wire rope of up to 100 m, 24 V power at 1 kW peak, IP65 protection and operation from 5 to 65 C. Safety equipment lists six time-of-flight sensors, an impact sensor and two emergency stops.

特長

  • Ultra-high-pressure water jetting for paint, coating, rust and lacquer removal
  • Rare-earth magnet adhesion on vertical and inclined steel
  • Works on tanks online, chimneys and bridge structures
  • Real-time video feed to judge jetting impact
  • Can also be used for painting and coating after surface preparation
  • Payload up to 50 kg
  • Crawling speed up to 10 mm/s
  • 0.1 mm encoder resolution
  • 100 Hz 6-DOF IMU
  • Tether with Kevlar wire rope, up to 100 m
  • Portable power supply, 24 V, 1 kW peak
  • 6 TOF sensors, impact sensor and 2 emergency stops

技術仕様

検証済み
本体
重量30 kg
寸法L 871 mm × W 534 mm × H 340 mm
可搬重量50 kg
移動性能
移動方式その他
速度0.04 km/h
使用環境Vertical and inclined steel surfaces: tanks, chimneys, bridge structures; IP65, 5°C to 65°C
センシング・演算
センサー2 down-facing cameras, 6-DOF IMU, wheel encoders, 6 TOF sensors, impact sensor
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the Gridbots Magneto-HydroBLAST?

Gridbots Magneto-HydroBLAST is a magnetic climbing robot from Gridbots that strips paint, coatings, rust and lacquer from steel surfaces with an ultra-high-pressure water jet.

Who makes the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST is made by Gridbots, a robotics company based in India.

How much does the Gridbots Magneto-HydroBLAST cost?

Gridbots has not publicly announced pricing for the Gridbots Magneto-HydroBLAST. You can enquire through RobotAIGeek for current pricing.

What is the Gridbots Magneto-HydroBLAST used for?

The Gridbots Magneto-HydroBLAST is designed for 清掃, コーティング, 塗装, and uhp water-jet surface preparation (hydroblasting) of steel walls. It is used in エネルギー, 建設, and 製造 settings.

What is the payload capacity of the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST has a payload capacity of 50 kg.

How much does the Gridbots Magneto-HydroBLAST weigh?

The Gridbots Magneto-HydroBLAST weighs 30 kg.

How fast is the Gridbots Magneto-HydroBLAST?

The Gridbots Magneto-HydroBLAST can move at speeds of up to 0.04 km/h.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

Gridbots Magneto-HydroBLAST の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?