RobotAIGeek
★아직 평가 없음

XENA 5.0 Fire Fighting

Mobile-RobotsIndiaIndia출시됨
XENA 5.0 Fire Fighting
비교

설명

XENA 5.0 Fire Fighting은(는) Club First Robotics의 Mobile-Robots입니다. 구조, 분사, 모니터링 용도로 설계되었습니다. 주요 수치: 240 kg, 가동 시간 300분.

XENA 5.0 is a remote-controlled tracked firefighting robot from Club First Robotics that drives into high-heat, smoke-filled or hazardous areas and attacks the fire from a roof-mounted water and foam monitor, keeping firefighters at a safe distance. It is built on the company's XENA all-terrain tracked platform. The robot runs on heavy-duty iron-core rubber tracks driven by BLDC motors, with a gyro-based straight-line and angle-following algorithm and individual differential gears for each drive. A single radio remote with about 300 m range controls both the vehicle and the monitor. The monitor delivers 1,800 to 3,000 litres per minute at up to 10 kg/cm2 in jet or fog mode, throws water up to 90 m and traverses 360 degrees, while a PTZ thermal camera provides automatic fire-point detection and alarms. The maker gives a top speed of 8 km/h, a 48 V 72 Ah battery for 5 to 6 hours of operation, a total weight of 240 kg and a footprint that fits a 1,280 x 860 x 650 mm box. It climbs slopes up to 45 degrees and stairs up to 30 degrees and can drag charged hose lines. Maker gallery photos show units with Delhi Fire Service and at an Airports Authority of India fire station.

주요 기능

  • Remote-controlled tracked firefighting robot (XENA all-terrain platform)
  • Remote-controlled water and foam monitor, 1,800-3,000 LPM at up to 10 kg/cm2
  • Jet and fog modes
  • water throw up to 90 m
  • Monitor movement: vertical +25 to 85 degrees, horizontal +/-180 degrees
  • PTZ thermal remote-controlled camera
  • automatic fire-point detection and alarm
  • Single remote controls both vehicle and monitor
  • RC range about 300 m
  • Top speed 8 km/h
  • Battery 48 V / 72 Ah
  • endurance 5-6 h
  • hot-attached power bank
  • fast charging
  • Heavy-duty spiral iron-core wire rubber tracks (25 mm thick) with track-belt suspension
  • BLDC heavy-duty motors
  • individual differential gear for each drive
  • Gyro-based straight-line and angular following algorithm
  • adaptive braking
  • Climbing slope up to 45 degrees
  • stairs up to 30 degrees
  • Total weight 240 kg
  • fits a 1,280 x 860 x 650 mm (L x W x H) box
  • Body and base of 1.5-3 mm GI/MS sheet, powder coated
  • Working temperature -20 to +95 C, up to 500 C with self-cooling (maker)
  • Payload capacity 120 kg in the key parameters (500 kg in the headline list)
  • Hose-drag capacity: 100 m of two charged hoses (headline)
  • 180 kg drag, up to 5-ton vehicle tow (key parameters)
  • Heat and overload protection
  • Operator training in about one minute (maker claim)
  • Made in India

기술 사양

검증됨
물리 사양
무게240 kg
크기L 1.28 m × W 860 mm × H 650 mm
소재GI / MS sheet steel, powder coated, Iron-core rubber tracks
이동성
이동 방식바퀴형
속도7.99 km/h
작동 환경Indoor and outdoor fire scenes, smoke-filled and high-heat areas, stairs and rough terrain, -20°C to 95°C
액추에이터BLDC electric motors with individual differential gears
전원
배터리 지속 시간300 min
센싱 & 컴퓨팅
센서PTZ thermal camera, Visible-light camera, Gyroscope
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the XENA 5.0 Fire Fighting?

XENA 5.0 is a remote-controlled tracked firefighting robot from Club First Robotics that drives into high-heat, smoke-filled or hazardous areas and attacks the fire from a roof-mounted water and foam monitor, keeping firefighters at a safe distance. It is built on the company's XENA all-terrain tracked platform.

Who makes the XENA 5.0 Fire Fighting?

The XENA 5.0 Fire Fighting is made by Club First Robotics, a robotics company based in India.

How much does the XENA 5.0 Fire Fighting cost?

Club First Robotics has not publicly announced pricing for the XENA 5.0 Fire Fighting. You can enquire through RobotAIGeek for current pricing.

What is the XENA 5.0 Fire Fighting used for?

The XENA 5.0 Fire Fighting is designed for 구조, 분사, 모니터링, and 원격. It is used in 에너지, 공공·정부, 공항, and 제조 settings.

How much does the XENA 5.0 Fire Fighting weigh?

The XENA 5.0 Fire Fighting weighs 240 kg.

How fast is the XENA 5.0 Fire Fighting?

The XENA 5.0 Fire Fighting can move at speeds of up to 7.99 km/h.

What is the battery life of the XENA 5.0 Fire Fighting?

The XENA 5.0 Fire Fighting runs for about 300 minutes on a charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

XENA 5.0 Fire Fighting 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?