설명
Tesollo Delto DG-3F-M은(는) Tesollo의 End-Effectors입니다. 피킹 용도로 설계되었습니다. 주요 수치: 1.1 kg, 가반 하중 10 kg, 12 자유도.
The DG-3F-M is a 12-DoF three-finger gripper built for industrial automation, pairing strong grasping with enough articulation — four joints per finger — to handle mixed part shapes without retooling. It holds 10 kg rated in an enveloping grasp and 2.5 kg rated in a pinch, at 1,114 g, and runs at 333 Hz over Modbus or Ethernet with absolute encoders throughout. Tesollo aims it at multi-product pick-and-place lines, component assembly, and bin and shelf picking, where the variety of parts is what defeats a fixed two-finger gripper. Optional fingertip sensing covers 6-axis force/torque, 3-axis force and tactile variants, and suction-type fingertips are available.
주요 기능
- 12 DoF across three fingers, 4 DoF per finger
- Enveloping payload 10 kg rated, 15 kg maximum
- Pinching payload 2.5 kg rated, 5 kg maximum
- 1,114 g weight
- 333 Hz control frequency
- Absolute encoders on all joints
- 24 V input, max 10 A
- Modbus (RTU, TCP) and Ethernet (TCP/IP)
- Suited to multi-product pick-and-place lines and component assembly
- Bin picking and shelf picking applications
- Optional 6-axis F/T, 3-axis force or tactile fingertip sensors
- Optional suction-type fingertip
기술 사양
| 물리 사양 | |
| 무게 | 1.114 kg |
|---|---|
| 가반하중 | 10 kg |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 12 |
| 액추에이터 | Integrated actuator per joint, absolute encoders |
| 센싱 & 컴퓨팅 | |
| 연결성 | Modbus (RTU, TCP), Ethernet (TCP/IP) |
| 소프트웨어 / AI | Delto Gripper Manager and SDK |
로봇 포럼
포럼 불러오는 중...
기술 사양
| 물리 사양 | |
| 무게 | 1.114 kg |
|---|---|
| 가반하중 | 10 kg |
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 12 |
| 액추에이터 | Integrated actuator per joint, absolute encoders |
| 센싱 & 컴퓨팅 | |
| 연결성 | Modbus (RTU, TCP), Ethernet (TCP/IP) |
| 소프트웨어 / AI | Delto Gripper Manager and SDK |
이미지




이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Tesollo Delto DG-3F-M?
The DG-3F-M is a 12-DoF three-finger gripper built for industrial automation, pairing strong grasping with enough articulation — four joints per finger — to handle mixed part shapes without retooling.
Who makes the Tesollo Delto DG-3F-M?
The Tesollo Delto DG-3F-M is made by Tesollo, a robotics company based in South Korea.
How much does the Tesollo Delto DG-3F-M cost?
Tesollo has not publicly announced pricing for the Tesollo Delto DG-3F-M. You can enquire through RobotAIGeek for current pricing.
What is the Tesollo Delto DG-3F-M used for?
The Tesollo Delto DG-3F-M is designed for 피킹. It is used in 제조 and robotics research settings.
What is the payload capacity of the Tesollo Delto DG-3F-M?
The Tesollo Delto DG-3F-M has a payload capacity of 10 kg.
How much does the Tesollo Delto DG-3F-M weigh?
The Tesollo Delto DG-3F-M weighs 1.11 kg.
How many degrees of freedom does the Tesollo Delto DG-3F-M have?
The Tesollo Delto DG-3F-M has 12 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-5F-M
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-5F-S
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-4F
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-3F-B
- Tesollo Delto DG-3F-M vs Barrett BarrettHand BH8-282








