説明
The DG-3F-M is a 12-DoF three-finger gripper built for industrial automation, pairing strong grasping with enough articulation — four joints per finger — to handle mixed part shapes without retooling. It holds 10 kg rated in an enveloping grasp and 2.5 kg rated in a pinch, at 1,114 g, and runs at 333 Hz over Modbus or Ethernet with absolute encoders throughout. Tesollo aims it at multi-product pick-and-place lines, component assembly, and bin and shelf picking, where the variety of parts is what defeats a fixed two-finger gripper. Optional fingertip sensing covers 6-axis force/torque, 3-axis force and tactile variants, and suction-type fingertips are available.
特長
- 12 DoF across three fingers, 4 DoF per finger
- Enveloping payload 10 kg rated, 15 kg maximum
- Pinching payload 2.5 kg rated, 5 kg maximum
- 1,114 g weight
- 333 Hz control frequency
- Absolute encoders on all joints
- 24 V input, max 10 A
- Modbus (RTU, TCP) and Ethernet (TCP/IP)
- Suited to multi-product pick-and-place lines and component assembly
- Bin picking and shelf picking applications
- Optional 6-axis F/T, 3-axis force or tactile fingertip sensors
- Optional suction-type fingertip
技術仕様
| 本体 | |
| 重量 | 1.114 kg |
|---|---|
| 可搬重量 | 10 kg |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 12 |
| アクチュエーター | Integrated actuator per joint, absolute encoders |
| センシング・演算 | |
| 接続性 | Modbus (RTU, TCP), Ethernet (TCP/IP) |
| ソフトウェア / AI | Delto Gripper Manager and SDK |
技術仕様
| 本体 | |
| 重量 | 1.114 kg |
|---|---|
| 可搬重量 | 10 kg |
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 12 |
| アクチュエーター | Integrated actuator per joint, absolute encoders |
| センシング・演算 | |
| 接続性 | Modbus (RTU, TCP), Ethernet (TCP/IP) |
| ソフトウェア / AI | Delto Gripper Manager and SDK |
画像
martti
martti
martti
martti投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Tesollo Delto DG-3F-M?
The DG-3F-M is a 12-DoF three-finger gripper built for industrial automation, pairing strong grasping with enough articulation — four joints per finger — to handle mixed part shapes without retooling.
Who makes the Tesollo Delto DG-3F-M?
The Tesollo Delto DG-3F-M is made by Tesollo, a robotics company based in South Korea.
How much does the Tesollo Delto DG-3F-M cost?
Tesollo has not publicly announced pricing for the Tesollo Delto DG-3F-M. You can enquire through RobotAIGeek for current pricing.
What is the Tesollo Delto DG-3F-M used for?
The Tesollo Delto DG-3F-M is designed for ピッキング. It is used in 製造 and robotics research settings.
What is the payload capacity of the Tesollo Delto DG-3F-M?
The Tesollo Delto DG-3F-M has a payload capacity of 10 kg.
How much does the Tesollo Delto DG-3F-M weigh?
The Tesollo Delto DG-3F-M weighs 1.11 kg.
How many degrees of freedom does the Tesollo Delto DG-3F-M have?
The Tesollo Delto DG-3F-M has 12 degrees of freedom.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-5F-M
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-5F-S
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-4F
- Tesollo Delto DG-3F-M vs Tesollo Delto DG-3F-B
- Tesollo Delto DG-3F-M vs Barrett BarrettHand BH8-282