설명
Xynova Prima 1은(는) Xynova의 End-Effectors입니다. 개발, 자재 취급, 연구 용도로 설계되었습니다. 주요 수치: 가반 하중 20 kg, 22 자유도.
Xynova Prima 1 is a direct-drive dexterous robot hand from Hangzhou component maker Xynova, built 1:1 to human-hand scale (190 mm) for humanoid robots. Fully direct-drive joints with zero backlash give it millisecond response, a 1 kHz control bandwidth and a 0.08-second open/close cycle, and very low back-drive torque (0.04 Nm) makes it compliant and safe to touch. Its 22-DoF biomimetic configuration delivers 15 N of fingertip force across four fingers and lifts up to 20 kg, with 0.5 N force-control accuracy and 0.5 mm repeatability for native hybrid force-position control. All five fingers carry visuo-tactile sensing that captures fine contact changes at the fingertips as high-density feedback for manipulation learning.
주요 기능
- 22-DoF biomimetic dexterous hand, 1:1 human scale (190 mm)
- Fully direct-drive, zero backlash
- 1 kHz response bandwidth
- 0.08 s open/close cycle
- Fingertip force 15 N across four fingers
- lifting payload up to 20 kg
- Force-control accuracy 0.5 N
- repeatability 0.5 mm
- native hybrid force-position control
- Five-finger visuo-tactile sensing with high-density fingertip feedback
- Minimum back-drive torque 0.04 Nm for compliant, safe interaction
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 20 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 22 |
| 작동 환경 | Mounted on humanoid or robot arms |
| 액추에이터 | Fully direct-drive finger joints |
| 센싱 & 컴퓨팅 | |
| 센서 | five-finger visuo-tactile sensors |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 20 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 고정형 |
| 자유도 | 22 |
| 작동 환경 | Mounted on humanoid or robot arms |
| 액추에이터 | Fully direct-drive finger joints |
| 센싱 & 컴퓨팅 | |
| 센서 | five-finger visuo-tactile sensors |
이미지
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Xynova Prima 1?
Xynova Prima 1 is a direct-drive dexterous robot hand from Hangzhou component maker Xynova, built 1:1 to human-hand scale (190 mm) for humanoid robots.
Who makes the Xynova Prima 1?
The Xynova Prima 1 is made by Xynova, a robotics company based in China.
How much does the Xynova Prima 1 cost?
Xynova has not publicly announced pricing for the Xynova Prima 1. You can enquire through RobotAIGeek for current pricing.
What is the Xynova Prima 1 used for?
The Xynova Prima 1 is designed for 개발, 자재 취급, 연구, and humanoid robot manipulation, teleoperation and manipulation-learning research. It is used in 연구 and 제조 settings.
What is the payload capacity of the Xynova Prima 1?
The Xynova Prima 1 has a payload capacity of 20 kg.
How many degrees of freedom does the Xynova Prima 1 have?
The Xynova Prima 1 has 22 degrees of freedom.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Xynova Prima 1 vs KAI Hand
- Xynova Prima 1 vs Tokyo Robotics Torobo
- Xynova Prima 1 vs WIRobotics ALLEX
- Xynova Prima 1 vs Xynova Flex 2
- Xynova Prima 1 vs Galaxea R1 Pro
