설명
Shihe Pipe Wire Grinding Robot은(는) Shihe Technology의 Cleaning-Robots입니다. 청소, 연삭, 연마 용도로 설계되었습니다. 주요 수치: 50 kg, 가반 하중 30 kg, 도달 범위 300 mm.
This robot grinds the outside of steel pipe as the preparation step before anti-corrosion coating, and it is built around a licensed abrasive technology: Shihe cites MontiPower's grinding method, which leaves a 40-80 micron surface roughness - the profile a coating needs to key into. It drives on integrated magnetic wheels, so it follows varying curvature, and suits pipe with a curvature radius above 600 mm. A linear motion mechanism extends the grinding reach to 300 mm, and it offers single-ring and multi-ring working modes - one band around the pipe, or repeated passes covering a length. It weighs 50 kg at 650 x 450 x 450 mm, carries up to 30 kg, works at 0-12 m2/h and crosses 5 mm obstacles. A force sensor on the attachment holds constant grinding pressure, and an automatic mode runs the machine back and forth around the pipe unattended while a manual mode lets the operator set range, angle and force by hand.
주요 기능
- MontiPower grinding technology leaving 40-80 micron surface roughness
- Integrated magnetic wheel drive adapting to varying curvature
- Suits steel pipe with curvature radius greater than 600 mm
- Linear motion mechanism extending grinding range to 300 mm
- Single-ring and multi-ring working modes
- Automatic mode runs unattended around the pipe
- manual mode sets range, angle and force
- Force sensor on the attachment for constant-force grinding
- Self weight 50 kg
- dimensions 650 x 450 x 450 mm
- maximum load 30 kg
- Working efficiency 0-12 m2/h
- working width 300 mm
- Minimum adaptable curvature radius 0.3 m
- obstacle crossing height 5 mm
기술 사양
검증됨| 물리 사양 | |
| 무게 | 50 kg |
|---|---|
| 크기 | L 650 mm × W 450 mm × H 450 mm |
| 가반하중 | 30 kg |
| 도달거리 | 300 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 조작 능력 | 낮음 |
| 작동 환경 | External surfaces of steel pipe with curvature radius above 600 mm, ahead of anti-corrosion coating |
| 액추에이터 | Integrated magnetic wheel drive with a linear motion mechanism extending grinding reach to 300 mm under force control |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 50 kg |
|---|---|
| 크기 | L 650 mm × W 450 mm × H 450 mm |
| 가반하중 | 30 kg |
| 도달거리 | 300 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 조작 능력 | 낮음 |
| 작동 환경 | External surfaces of steel pipe with curvature radius above 600 mm, ahead of anti-corrosion coating |
| 액추에이터 | Integrated magnetic wheel drive with a linear motion mechanism extending grinding reach to 300 mm under force control |
이미지

이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Shihe Pipe Wire Grinding Robot?
This robot grinds the outside of steel pipe as the preparation step before anti-corrosion coating, and it is built around a licensed abrasive technology: Shihe cites MontiPower's grinding method, which leaves a 40-80 micron surface roughness - the profile a coating needs to key into.
Who makes the Shihe Pipe Wire Grinding Robot?
The Shihe Pipe Wire Grinding Robot is made by Shihe Technology, a robotics company based in China.
How much does the Shihe Pipe Wire Grinding Robot cost?
Shihe Technology has not publicly announced pricing for the Shihe Pipe Wire Grinding Robot. You can enquire through RobotAIGeek for current pricing.
What is the Shihe Pipe Wire Grinding Robot used for?
The Shihe Pipe Wire Grinding Robot is designed for 청소, 연삭, and 연마. It is used in 에너지, 건설, and 제조 settings.
What is the payload capacity of the Shihe Pipe Wire Grinding Robot?
The Shihe Pipe Wire Grinding Robot has a payload capacity of 30 kg and a reach of 300 mm.
How much does the Shihe Pipe Wire Grinding Robot weigh?
The Shihe Pipe Wire Grinding Robot weighs 50 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Shihe Pipe Wire Grinding Robot vs WLS-9YQ-LD1 Solar Panel Cleaning Drone
- Shihe Pipe Wire Grinding Robot vs Disinfection robots
- Shihe Pipe Wire Grinding Robot vs Kit
- Shihe Pipe Wire Grinding Robot vs Sam-Spray
- Shihe Pipe Wire Grinding Robot vs Sam-UV





