説明
Shihe Pipe Wire Grinding RobotはShihe TechnologyのCleaning-Robotsです。 清掃、研削、研磨向けに設計されています。 主な数値:50 kg、可搬質量 30 kg、リーチ 300 mm。
This robot grinds the outside of steel pipe as the preparation step before anti-corrosion coating, and it is built around a licensed abrasive technology: Shihe cites MontiPower's grinding method, which leaves a 40-80 micron surface roughness - the profile a coating needs to key into. It drives on integrated magnetic wheels, so it follows varying curvature, and suits pipe with a curvature radius above 600 mm. A linear motion mechanism extends the grinding reach to 300 mm, and it offers single-ring and multi-ring working modes - one band around the pipe, or repeated passes covering a length. It weighs 50 kg at 650 x 450 x 450 mm, carries up to 30 kg, works at 0-12 m2/h and crosses 5 mm obstacles. A force sensor on the attachment holds constant grinding pressure, and an automatic mode runs the machine back and forth around the pipe unattended while a manual mode lets the operator set range, angle and force by hand.
特長
- MontiPower grinding technology leaving 40-80 micron surface roughness
- Integrated magnetic wheel drive adapting to varying curvature
- Suits steel pipe with curvature radius greater than 600 mm
- Linear motion mechanism extending grinding range to 300 mm
- Single-ring and multi-ring working modes
- Automatic mode runs unattended around the pipe
- manual mode sets range, angle and force
- Force sensor on the attachment for constant-force grinding
- Self weight 50 kg
- dimensions 650 x 450 x 450 mm
- maximum load 30 kg
- Working efficiency 0-12 m2/h
- working width 300 mm
- Minimum adaptable curvature radius 0.3 m
- obstacle crossing height 5 mm
技術仕様
検証済み| 本体 | |
| 重量 | 50 kg |
|---|---|
| 寸法 | L 650 mm × W 450 mm × H 450 mm |
| 可搬重量 | 30 kg |
| リーチ | 300 mm |
| 移動性能 | |
| 移動方式 | 車輪型 |
| マニピュレーション | 低 |
| 使用環境 | External surfaces of steel pipe with curvature radius above 600 mm, ahead of anti-corrosion coating |
| アクチュエーター | Integrated magnetic wheel drive with a linear motion mechanism extending grinding reach to 300 mm under force control |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 50 kg |
|---|---|
| 寸法 | L 650 mm × W 450 mm × H 450 mm |
| 可搬重量 | 30 kg |
| リーチ | 300 mm |
| 移動性能 | |
| 移動方式 | 車輪型 |
| マニピュレーション | 低 |
| 使用環境 | External surfaces of steel pipe with curvature radius above 600 mm, ahead of anti-corrosion coating |
| アクチュエーター | Integrated magnetic wheel drive with a linear motion mechanism extending grinding reach to 300 mm under force control |
画像

投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Shihe Pipe Wire Grinding Robot?
This robot grinds the outside of steel pipe as the preparation step before anti-corrosion coating, and it is built around a licensed abrasive technology: Shihe cites MontiPower's grinding method, which leaves a 40-80 micron surface roughness - the profile a coating needs to key into.
Who makes the Shihe Pipe Wire Grinding Robot?
The Shihe Pipe Wire Grinding Robot is made by Shihe Technology, a robotics company based in China.
How much does the Shihe Pipe Wire Grinding Robot cost?
Shihe Technology has not publicly announced pricing for the Shihe Pipe Wire Grinding Robot. You can enquire through RobotAIGeek for current pricing.
What is the Shihe Pipe Wire Grinding Robot used for?
The Shihe Pipe Wire Grinding Robot is designed for 清掃, 研削, and 研磨. It is used in エネルギー, 建設, and 製造 settings.
What is the payload capacity of the Shihe Pipe Wire Grinding Robot?
The Shihe Pipe Wire Grinding Robot has a payload capacity of 30 kg and a reach of 300 mm.
How much does the Shihe Pipe Wire Grinding Robot weigh?
The Shihe Pipe Wire Grinding Robot weighs 50 kg.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Shihe Pipe Wire Grinding Robot vs WLS-9YQ-LD1 Solar Panel Cleaning Drone
- Shihe Pipe Wire Grinding Robot vs Disinfection robots
- Shihe Pipe Wire Grinding Robot vs Kit
- Shihe Pipe Wire Grinding Robot vs Sam-Spray
- Shihe Pipe Wire Grinding Robot vs Sam-UV





